Product Info
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W(-B/-C)/TX82-W Hardware Interface Description
2.1 Application Interface
69
t TX62-W_TX62-W-x_TX82-W_HID_v01.000 2021-05-19
Confidential / Preliminary
Page 48 of 154
2.1.11.5 SUSPEND Mode Indicator
When all conditions for entering into SUSPEND mode are fulfilled, the SUSPEND_MON signal
changes from high to low, indicating that the module has entered its SUSPEND mode.
When leaving the SUSPEND mode, the URC “^SYSRESUME” is triggered, and the SUS-
PEND_MON signal is set to high again.
SUSPEND_MON usage can be enabled/disabled by AT command (see [1]: AT^SCFG “GPIO/
Mode/Suspend”).