Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 4.1 Mechanical Dimensions of TX62-W
- 4.2 Mechanical Dimensions of TX82-W, TX82-W-B, TX62-W-B and TX62-W-C
- 4.3 Mounting TX62/TX82 onto the Application Platform
- 4.4 Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W/TX82-W Hardware Interface Description
6.1 Revision History
164
t
TX62-W_TX62-W-x_TX82-W-x_HID_v01.200d 2022-09-08
Public / Preliminary
Page 157 of 170
Preceding document: “Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.026
New document: "Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.026a
Preceding document: “Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.022a
New document: "Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.026
Preceding document: “Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.022
New document: "Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.022a
Preceding document: “Cinterion
®
TXx2-W Hardware Interface Description" v00.016
New document: "Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.022
5.1 Replaced UL 60950 with UL 62368-1 in Table 37.
5.1.1 Completed Table 42 regarding hazardous substances, chemical reaction.
5.2 Added remark regarding responsibility of the end device manufacturer.
Chapter What is new
3.4.1 Added power supply ratings for TX62-W.
Chapter What is new
1.1 Revised version of TX62-W-B
2.1.8 Revised Figure 19
5.1 Added REACH directive to Table 36
5.1 Change Safety Standard to IEC 62368-1 in Table 38
5.1.1 New chapter regarding IEC 62368-1 Classification
7.1 Revised ordering and module label numbers inn Table 47
Chapter What is new
Throughout
document
Adapted GSM voltage range (3.1V...4.6V)
1.4 Revised block diagrams Figure 3, Figure 4, and Figure 5.
2.1.4 Revised Figure 11, and changed Table 18 accordingly.
2.2.1 Revised receiver input sensitivity ratings in Table 11 and Table 12.
3.2.2.2 Revised Figure 39.
Chapter What is new
Throughout
document
Added details about the embedded processing option.
Revised supported footprint for TX62-W-B.
Replaced MIM with eUICC.
2.1.2 Added signal properties for eUICC interface lines.
2.1.4 Revised Figure 11.
Chapter What is new