Specifications

Table Of Contents
Cinterion
®
TX62-W/TX82-W Hardware Interface Description
1 Introduction
21
t TX62-W_TX62-W-x_TX82-W-x_HID_v01.200d 2022-09-08
Public / Preliminary
Page 10 of 170
1 Introduction
This document
1
describes the hardware of the Cinterion
®
TX62/TX82 module variants opti-
mized for global coverage as they support a comprehensive set of bands required for global
deployment. It helps you quickly retrieve interface specifications, electrical and mechanical de-
tails and information on the requirements to be considered for integrating further components.
1.1 Product Variants
This document applies to the following Thales module variants:
•Cinterion
®
TX62-W (as of v01.200)
•Cinterion
®
TX62-W-B (as of v01.000)
•Cinterion
®
TX62-W-C (as of v01.000)
•Cinterion
®
TX82-W (as of v01.200)
•Cinterion
®
TX82-W-B (as of v01.200 Engineering Samples)
The following table shows the differences between the product variants. Wherever necessary
a note is made to differentiate between the product variants.
Note: TX82-W-B is still at an early development stage and not yet officially available.
1. The document is effective only if listed in the appropriate Release Notes as part of the technical docu-
mentation delivered with your Thales product.
Table 1: Differences between product variants
Feature TX62-W TX62-W-B TX62-W-C TX82-W TX82-W-B
Dimensions
(mm)
15.3x15.3x 2.9 15.3x20.9x2.28 15.3x20.9x2.92 15.3x20.9x2.28 15.3x20.9x2.92
GSM
(2G)
-- -- -- Supported Supported
450MHz bands
(Bd31, Bd72)
-- -- Supported -- --
RF Output
Power Class
Class 5 Class 3 Class 2 for
450MHz bands
Class 3 for all
other bands
Class 5 Class 3