Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 4.1 Mechanical Dimensions of TX62-W
- 4.2 Mechanical Dimensions of TX82-W, TX82-W-B, TX62-W-B and TX62-W-C
- 4.3 Mounting TX62/TX82 onto the Application Platform
- 4.4 Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W/TX82-W Hardware Interface Description
4.2 Mechanical Dimensions of TX82-W, TX82-W-B, TX62-W-B and TX62-W-C
142
t
TX62-W_TX62-W-x_TX82-W-x_HID_v01.200d 2022-09-08
Public / Preliminary
Page 123 of 170
4.2
Mechanical Dimensions of TX82-W, TX82-W-B, TX62-W-B and
TX62-W-C
Figure 57 shows the top and bottom view of TX82-W, TX82-W-B, TX62-W-B, and TX62-W-C,
and provides an overview of the board's mechanical dimensions. For further details see Figure
59. Figure 60 shows the area at the module’s bottom side where possible markings might be
printed.
Note: Other then shown in the below 3D view (Figure 57) the module height for TX82-W and
TX62-W-B is 2.30mm, and for TX82-W-B and TX62-W-C is 2.92mm.
Figure 57: TX82– top and bottom view
Product label
Top view
Bottom view