Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 4.1 Mechanical Dimensions of TX62-W
- 4.2 Mechanical Dimensions of TX82-W, TX82-W-B, TX62-W-B and TX62-W-C
- 4.3 Mounting TX62/TX82 onto the Application Platform
- 4.4 Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W/TX82-W Hardware Interface Description
1.2 Key Features at a Glance
21
t TX62-W_TX62-W-x_TX82-W-x_HID_v01.200d 2022-09-08
Public / Preliminary
Page 15 of 170
Special features
Approval
(see Section 5)
RED, CE, FCC, ISED, UL, RoHS, and REACH compliant
GCF, PTCRB
Phonebook SIM and phone
Cinterion
®
IoT Suite ser-
vices
(Optionally) supports an IoT Suite client based on the LWM2M protocol.
The client can be configured to collect diagnostic information about the
module and cellular network and to send it periodically to the Cinterion
®
IoT
Suite server platform, where it can be visualized for further analysis.
Communication to Thales Device Management Hub is realized using a
resource-efficient protocol specifically designed by Thales in order to keep
the energy and data usage to a minimum. The protocol behavior may be
influenced by means of configuration.
Additionally, the service provides device control functionality. This includes
remote flash file system management, module firmware over-the-air
updates (FOTA) and remote configuration.
The Cinterion
®
IoT Suite also generates alarms when a specific module or
network parameter changes or exceeds a threshold. Alarms can be sent to
the platform as soon as possible disregarding the connection interval. For
more information, please refer to [7] and [8].
Evaluation kit (For ordering information see Section 7.1)
LGA DevKit LGA DevKit designed to test Thales LGA modules. For more information
see also LGA DevKit.
Evaluation module TX62/TX82 module soldered onto a dedicated PCB that can be connected
to the an approval adapter in order to be mounted onto the DSB75 or DSB-
Mini.
DSB75 DSB75 Development Support Board designed to test and type approve
Thales modules and provide a sample configuration for application engi-
neering. A special adapter is required to connect the TX62/TX82 evaluation
module to the DSB75.
Feature Implementation