Specifications
Table Of Contents
- Contents
- Tables
- Figures
- 1 Introduction
- 2 Interface Characteristics
- 2.1 Application Interface
- 2.2 RF Antenna Interface
- 2.3 GNSS Interface
- 2.4 Sample Application
- 3 Operating Characteristics
- 3.1 Operating Modes
- 3.2 Power Up/Power Down Scenarios
- 3.3 Power Saving
- 3.4 Power Supply
- 3.5 Operating Temperatures
- 3.6 Electrostatic Discharge
- 3.7 Blocking against RF on Interface Lines
- 3.8 Reliability Characteristics
- 4 Mechanical Dimensions, Mounting and Packaging
- 4.1 Mechanical Dimensions of TX62-W
- 4.2 Mechanical Dimensions of TX82-W, TX82-W-B, TX62-W-B and TX62-W-C
- 4.3 Mounting TX62/TX82 onto the Application Platform
- 4.4 Packaging
- 5 Regulatory and Type Approval Information
- 6 Document Information
- 7 Appendix
Cinterion
®
TX62-W/TX82-W Hardware Interface Description
6.1 Revision History
164
t
TX62-W_TX62-W-x_TX82-W-x_HID_v01.200d 2022-09-08
Public / Preliminary
Page 156 of 170
Preceding document: “Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.026b
New document: "Cinterion
®
TX62-W/TX82-W Hardware Interface Description" v01.000
Preceding document: “Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.026a
New document: "Cinterion
®
TX62-W(-B)/TX82-W Hardware Interface Description" v00.026b
Chapter What is new
3.4.1 Updated power supply ratings for TX62-W-C.
4.2 Updated section showing mechanical dimensions.
Chapter What is new
Throughout
document
Added new Variant: TX62-W-C.
2.1.2,
3.2.1.1
Revised high level pulse width for ON signal (1ms --> 30ms).
2.1.6.1 Revised Figure 15 showing enhanced ESD protection for SIM interface.
2.1.7 Added configuration of dual mode.
2.1.11.3 Added note on FST_SHDN line becoming active only 3 seconds after module startup.
2.4 Revised Figure 34.
3.2.1.1 Added pull-down resistor in Figure 36.
3.2.1.2 New section Automatic Power On.
3.2.4.1 Clarified description of regular switch off behavior.
Added note mentioning differences in switch of timing between Cat M1 and Cat NB1/2.
4.2 Updated section showing mechanical dimensions.
4.3 Added note regarding placement of external components.
5.4 Added Table 43, Table 45, and Table 46 with FCC and ISED antenna gain limits.
5.5 New section Compliance with Korean Rules and Regulations (TX62-W-B).
7.2 Updated module label information.
Chapter What is new
2.1.1 Revised G15/G16 pad assignments, and removed superfluous footnote in Table 3.
2.1.2 Revised Table 4: No internal pull up resistors for I
2
C lines.
2.1.4, 2.1.5 Added note below Figure 11 and Figure 13 explaining dotted lines.
2.1.7 Revised Figure 16.
Added Figure 17 showing how to connect eUICC to module’s SIM interface lines.
2.1.8.1 Revised GPIO availability with embedded processing option, and adapted whole docu-
ment accordingly.
2.2.1 Removed “Max.” column from Table 11 and Table 12.
3.2.2.2 Revised description of the emergency restart process.
3.2.4.1 Added note that worst fast shutdown time cannot be specified.
3.4.1 Added power supply ratings for TX62-W-B and TX82-W.