Cipherium bonalinx-W 1300 Administrator’ s Manual Cipherium bonalinx-W 1300 Administrator's Manual Version 1.0.0 © 2004 Cipherium Systems Co., Ltd.
Cipherium bonalinx-W 1300 Administrator’ s Manual Copyright The intellectual property rights and copyright of this manual belong to Cipherium Systems Co., Ltd. and are protected by the R.O.C. copyright laws and international copyright laws. No part or the manual in its entirety may be transshipped, transmitted, duplicated, distributed, displayed, published, or broadcasted in any form or by any means without the prior written permission of Cipherium Systems Co., Ltd.
Cipherium bonalinx-W 1300 Administrator’ s Manual Table of Contents 1. 2. 3. Preface.......................................................................................................1 1.1. Brief Introduction of bonalinx -W 1300 .......................................................1 1.2. Before you Read .....................................................................................2 1.2.1. Audience ........................................................................................
Cipherium bonalinx-W 1300 Administrator’ s Manual 5. 4.1. Main Menu of Console interface ............................................................. 26 4.2. Utilities for network debugging of Console interface................................. 27 4.3. Change admin password of Console interface......................................... 28 4.4. Reload factory default of Console interface ............................................. 29 4.5. Restart Cipherium bonalinx-W 1300 ........................
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.5.2 Backup / Restore Strategy ............................................................... 102 5.5.3 Firmware Upgrade........................................................................... 104 5.5.4 Restart ........................................................................................... 104 5.6 Status ................................................................................................. 105 5.6.1 System Status........
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure Index Figure 3-1 The bonalinx -W 1300 User Public LAN Flow .................................... 18 Figure 3-2 Example of Setting up a Small Enterprise Network.......................... 19 Figure 3-3 Administrator Login ......................................................................... 20 Figure 3-4 Welcome Screen.............................................................................. 21 Figure 3-5 Configuration Wizard Screen.............
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-18 Configure Wireless port ................................................................. 42 Figure 5-19 Enable DHCP Sever of Wireless Port ............................................. 42 Figure 5-20 Restart............................................................................................ 43 Figure 5-21 System Configuration ....................................................................
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-50 Example of Download User Account Interface ............................... 67 Figure 5-51 POP3 Setup Screen........................................................................ 67 Figure 5-52 RADIUS Setup Screen.................................................................... 69 Figure 5-53 LDAP Setup Screen........................................................................ 70 Figure 5-54 NT Domain Setup Screen........................
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-82 Defining the Static Assignment Address Correspondence ............ 93 Figure 5-83 Defining Public Accessible Server................................................. 94 Figure 5-84 IP Address and Network Port Redirect ........................................... 95 Figure 5-85 Privilege IP Address ....................................................................... 96 Figure 5-86 Direct Connecting MAC Address....................................
Cipherium bonalinx-W 1300 Administrator’ s Manual 1. Preface 1.1. Brief Introduction of bonalinx-W 1300 Wireless network breaks through the barrier of traditional thinking, and releases unlimited innovation and implementability, which becomes the working attitude and living environment pursued by people nowadays. In addition, manufacturers try very hard to lower the entry level and thus more consumers are happy to have such technology to get rid of the tangled network cables and limitations.
Cipherium bonalinx-W 1300 Administrator’ s Manual and operation logic, which allows you to get a hand on it easily. You can use all of the functions of the system with a click. A full web-based management interface allows you to operate and manage the system online by the browser. At the user end, the login Public LAN is also operated through the browser, and it does not require installing an additional software interface.
Cipherium bonalinx-W 1300 Administrator’ s Manual 2. Product Description 2.1. Package Contents The standard package of the bonalinx-W 1300 includes: z bonalinx-W 1300 x 1 z CD-ROM (Administrator’s Manual and Quick Installation Guide) x 1 z Power adaptor x 1 z Ethernet cable x 1 z console cable x 1 z Wall-mount 2.2. Front Panel WAN Indicating Light Stands for being connected to WAN port. .
Cipherium bonalinx-W 1300 Administrator’ s Manual (Back Side ) Public LAN Port can be connected to the open network environment managed by the system, and requires AC Power Power Cord Plug Reset button Resumes the factory defaults or reconfigures the system. We recommend you to set this configuration by experts. authentication before logging on to the Internet. Private LAN Port can be connected to the trustful Intranet environment by Switch without authentication for logging on to the Internet.
Cipherium bonalinx-W 1300 Administrator’ s Manual Public LAN Port The Public LAN is used to connect the desired network for management or WLAN, and all users connected to the Public LAN must login successfully before using the network resources. Private LAN Port The Private LAN port is used to connect to the trustful network or Ethernet. In other words, the computer or user connected to the bonalinx-W 1300 from Private LAN does not require login to use the network resources.
Cipherium bonalinx-W 1300 Administrator’ s Manual 2.4. Technical Specifications 2.4.1. Standards y Supports IEEE 802.1x y Supports IEEE 802.11g 2.4.2. Networking y WAN interface supports Static IP, DHCP client, and PPPoE client y Interface supports static IP y Supports NAT mode and router mode y Built-in DHCP server y Built-in NTP client y Supports Redirect of network data y Supports IPSec(ESP), PPTP and H.
Cipherium bonalinx-W 1300 Administrator’ s Manual y Supports two or more Public LAN mechanisms simultaneously y Built-in user database can choose MAC address locking y Can set the time for the user to login to the system y Can set the user’s idle time y Can specify the connection to MAC address without Public LAN y Can specify the connection to IP address without Public LAN y Permits or refuses all connections when the WAN interface fails y Supports web-based login y Provides several frien
Cipherium bonalinx-W 1300 Administrator’ s Manual 3. Installation 3.1. Installing the bonalinx-W 1300 3.1.1. System Requirements y Standard 10/100BaseT including four network cables with RJ-45 connectors. y All PCs need to install the TCP/IP network protocol. 3.1.2. Installation Procedure Following the following steps to install the bonalinx-W 1300: 1. Make sure the power of the bonalinx-W 1300 is turned off. 2. Connect the WAN port.
Cipherium bonalinx-W 1300 Administrator’ s Manual use the cross over line. Warning: Public LAN cannot connect to Layer 3 device. 5. Connect the Private LAN port. The Private LAN port is used to connect the trustful network or Ethernet. In other words, the computer connected to the bonalinx-W 1300 from Private LAN does not require login to use the network resources. This port can be used to connect to a server such as File Server or a DataBase Server, etc.
Cipherium bonalinx-W 1300 Administrator’ s Manual 3.1.3.1. y TCP/IP Network Setup If the operating system of your PC is Windows 95/98/ME/2000/XP, then you just need to keep the default setting (without any change) to directly start/restart the system. y During the process of starting the system, the bonalinx-W 1300 with DHCP function will automatically assign the appropriate IP address (and related information) to each PC.
Cipherium bonalinx-W 1300 Administrator’ s Manual 2. Choose the “Connections” Icon, and then click “Setup” . 3. Choose “I want to set up my Internet connection manually, or I want to connect through a local Area network (LAN)”, and then click “Next”.
Cipherium bonalinx-W 1300 Administrator’ s Manual 4. Choose “I connect through a local area network (LAN)” and click “Next”. 5. Do not choose any option in the following LAN window for Internet configuration.
Cipherium bonalinx-W 1300 Administrator’ s Manual 6. When the system asks “Do you want to set up an Internet mail account now? ”, choose “No”. 7. Click “ Finish” to exit the Internet Connection Wizard. Now, you have completed the setup.
Cipherium bonalinx-W 1300 Administrator’ s Manual Windows XP 1. Choose Start - Console – Internet Option. 2. Choose the “Connections” icon, and then click “Setup” .
Cipherium bonalinx-W 1300 Administrator’ s Manual 3. Press “Next” when the new connection wizard appears on the screen. 4. Choose “Connect to the Internet” and then click “Next”.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5. Choose “Set up my connection manually”, and then click “Next”. 6. Choose “Connect using a broadband connection that is always on”, and then click “Next”.
Cipherium bonalinx-W 1300 Administrator’ s Manual 7. Click “Finish” to exit the Connection Wizard. Now, you have completed the setup. 3.2. Getting Started 3.2.1. System Concept The bonalinx-W 1300 is responsible for controlling all network data passing through the system. The users under the managed network must be authenticated in order to obtain the right to access the network beyond the managed network.
Cipherium bonalinx-W 1300 Administrator’ s Manual is an authorized user, then the bonalinx-W 1300 will authorize the user with an appropriate access right, so that the user can use the network. The concept of the operation of the whole Public LAN procedure is shown in the following figure.
Cipherium bonalinx-W 1300 Administrator’ s Manual 3.2.2. Connecting Network Devices Figure 3-2 provides a simple example of setting up a small enterprise network. Figure 3-2 Example of Setting up a Small Enterprise Network In Figure 3-2, the bonalinx-W 1300 is set to control a part of the company’ s intranet. The whole managed network includes cable network users and wireless network users.
Cipherium bonalinx-W 1300 Administrator’ s Manual 3.2.3. Begin Installation After the bonalinx-W 1300 is connected to the network devices, you can start setting the bonalinx-W 1300 to control your network environment. In the following sections, we will guide you step by step to set up a system composed by individual bonalinx-W 1300. 3.2.3.1. 1.
Cipherium bonalinx-W 1300 Administrator’ s Manual 3. System Setup After successfully logging on to the bonalinx-W 1300 and entering into the web management interface, you can run the installation wizard to help you complete the setup. Figure 3-4 Welcome Screen Click System Configuration > Configuration Wizard and the configuration wizard will appear on the screen as shown in Figure 3-5.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 3-5 Configuration Wizard Screen Click “Run Wizard” and the configuration wizard will guide you through the seven steps for completing the setup. Please refer to Chapter 5.1.1 “Configuration Wizard” for the detailed description. . 3.2.3.2.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 3-6 Entering Username and Password Key in the created username and password in this interface. And then click on the “Enter” button (for both standard user and on-demand user). Figure 3-7 Successful Login Page After this user login successfully, you have just completed the setup of the bonalinx-W 1300 and allowed it to provide you with a managed network environment. This user can also browse the webpage on the Internet.
Cipherium bonalinx-W 1300 Administrator’ s Manual Nevertheless, if you are not a on-demand user, please do not click on “Remaining”, because the following error window will appear. Figure 3-8 Logon Fails (not an on-demand user) The following is the successful login page for on-demand user. There is an extra function, the “Redeem” buttom, that user can add credit in the current account if the remaining usage is considered to be insufficient.
Cipherium bonalinx-W 1300 Administrator’ s Manual After user has payed the redeem cost at counter, he/she will get another username and password, by key in this information in the appropriate window, the system will merge the two identities and the available usage. Figure 3-10 Redeem page This window will show the remaining hours or data size for user’s online access.
Cipherium bonalinx-W 1300 Administrator’ s Manual 4. Console Interface The interface of bonalinx -W 1300 provide 2 kinds of function, A. The bonalinx-W 1300 provides a RJ11 interface for the manager to handle different problems and situations for the operation. To link to the RJ11 interface of the bonalinx-W 1300, you need a modem cable. The terminal simulation program that you use, such as the super terminal, should be set to the parameter value of 9600,8,n,1.
Cipherium bonalinx-W 1300 Administrator’ s Manual 4.2. Utilities for network debugging of Console interface Figure 4-2 bonalinx-W 1300 Utility Menu The bonalinx-W 1300 console interface provides several utilities to assist the Administrator to control the system conditions and debug. The utilities provided are described as follows: 1. Ping host (IP): By sending ICMP echo request, the online condition with specific target can be tested. 2.
Cipherium bonalinx-W 1300 Administrator’ s Manual 6. Display system up time: The system up time of the bonalinx-W 1300 is displayed. 7. Check service status: The current execution status of each service on the bonalinx-W 1300 is checked. 8. Set device into “safe mode”: If administrator is unable to use Web Management Interface on the browser while bonalinx-W 1300 is unexplicit failure.
Cipherium bonalinx-W 1300 Administrator’ s Manual Caution: Although it does not require a password for the connection via the serial port, the same management interface can access via SSH. Therefore we recommend you to immediately change the bonalinx-W 1300 Admin username and password after you login to the system for the first time. 4.4. Reload factory default of Console interface It will reset the system configuration to factory defaults. 4.5.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5. Web Management Interface This section gives a complete description on the setup of the bonalinx-W 1300. Table 5-1 shows all options and functions of the bonalinx-W 1300 and facilitates your operation and using the bonalinx-W 1300.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.1. System Configuration This option provides the following detailed items to further set up your system, and these items include: Configuration Wizard, System Information, WAN Configuration, Authentication Configuration, and Private LAN Configuration. Please refer to the detailed setup if you want mo re detailed information. 5.1.1. Configuration Wizard The Wizard provides a simple way to help you to set up the bonalinx-W 13001200.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5. ConfigureAuthentication Information 6. Select Authentication Methods 7. Set Wireless – Access Point Connection 8. Configure Wireless Port’s Information 9. Restart After you are familiar with the whole process, please click “Next” to continue, or “Exit” to exit the Setup Wizard. Figure 5-2 Setup Wizard Description 1. Change Admin’s Password Please change the admin’s password as shown in Figure 5-3.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-3 2. Change Admin’s Password Screen Choose the System’s Time Zone Choose your system’s time zone as shown in Figure 5-4. After this setup is completed, click “Next” to continue or “Exit” to exit.
Cipherium bonalinx-W 1300 Administrator’ s Manual 3. Set System Information After logging on successfully, you will see the Home Page, NTP Server, and DNS server first. Ƿ Succeed Page: It will direct you to the website after a user logs on. You can enter the website of your company or any major entry website. Ƿ Time Server: Please enter the website of the timer server. ǷDNS Server: Please enter the DNS server that provides service on the network as shown in Figure 5-5.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-6 Select the Connection Type for WAN Port • For static IP address After you select Static IP Address, please enter the IP, Netmask, and Gateway of WAN PORT as shown in Figure 5-7. After this setup is comp leted, click “Next” to continue or “Exit” to exit.
Cipherium bonalinx-W 1300 Administrator’ s Manual • For dynamic IP address After you select Dynamic IP Address as shown in Figure 5-8, click “Next” to continue or “Exit” to exit. Figure 5-8 Select the Connection Type for WAN Dynamic IP Address • For PPPoE After you select PPPoE, enter the username and password of the PPPoE as shown in Figure 5-9. After this setup is completed, click “Next” to continue or “Exit” to exit.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5. Configure Public LAN This procedure sets the related information of the Public LAN as shown in Figure 5-10. Please enter IP and Subnet Mask, and determine to Enable or Disable the DHCP. Figure 5-10 Configure Public LAN After this setup is completed, click “Next” to continue or “ Exit” to exit. • If you select to enable the DHCP, please refer to Figure 5-11.
Cipherium bonalinx-W 1300 Administrator’ s Manual Related information for enabling the DHCP Server includes DHCP Start IP Address, DHCP End IP Address, Domain Name, Primary DNS IP Address, and Secondary DNS IP address. After this setup is completed, click “Next” to continue or “Exit” to exit. 6. Select Public LAN Methods The Public LAN method sets the user’s information and authenticates the user’s account. You can set the Postfix Name to an easily identified name such as “Local User” and the like.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-13 Add Local Users • After you select POP3 User, please enter the Server IP and Server Port of POP3 and determine whether or not to enable SSL function as shown in Figure 5-14.
Cipherium bonalinx-W 1300 Administrator’ s Manual Public LAN Method as shown in Figure 5-15. After this setup is completed, click “ Next” to continue or “ Exit” to exit. Figure 5-15 Radius Setup Screen • After you select LDAP User, please enter the information for Server IP, Server Port, and Base DN as shown in Figure 5-16. After this setup is completed, click “Next” to continue or “Exit” to exit.
Cipherium bonalinx-W 1300 Administrator’ s Manual 7. Set Wireless – Access Point Connection Please enter SSID name and select the Wireless Port’s function, such as select channel from 1 to 6 and select AP mode then click next. Figure 5-17 Set Wireless – Access Point Connection Caution: This device can support Channel 1-13. When using in other plcace as Taiwan, USA, Channel 12, 13 will be disabled by software and only Channel 1-11 are applicable. 8.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-18 Configure Wireless port • If you select to enable the DHCP, please refer to Figure 5-19. Figure 5-19 Enable DHCP Sever of Wireless Port Related information for enabling the DHCP Server includes DHCP Start IP Address, DHCP End IP Address, Domain Name, Primary DNS IP Address, and Secondary DNS IP address.
Cipherium bonalinx-W 1300 Administrator’ s Manual After this setup is completed, click “Next” to continue or “Exit” to exit. 9. Restart If you are sure that your setup is correct, please click the “Restart” button to restart and complete all setup procedures. If you do not want to keep the previous setups, please click “Exit”. It will invalidate the previous setups.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.1.2. System Information Figure 5-21 System Configuration System Name : The name is bonalinx-W 1300 system, and the default is “bonalinx-W 1300”. Administrator Info: It lets the Administrator enter the related information such as administrator’s name, telephone number, and e-mail. If a user connects to the bonalinx-W 1300 and the WAN Port has a connection problem, the user login screen will show the data entered into these columns on screen.
Cipherium bonalinx-W 1300 Administrator’ s Manual Remote Manage IP: You can set up the system to connect the WAN Port to the website that executes the functions of managing the bonalinx-W 1300 such as 10.2.3.0/24. It means that as long as you are at the IP address of 10.2.3.0/24, you can execute the functions for managing the bonalinx-W 1300. Another example is 10.0.0.3. It means that as long as you are at the IP address of 10.0.0.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.1.3. WAN Configuration There are 3 methods of obtaining IP from the WAN Port: Static IP Address, Dynamic IP Address, and PPPoE. 1. Static IP Address: Manually specify the IP address of the WAN Port, which is applicable for the network environment that the IP address cannot be obtained from WAN Port automatically. Figure 5-22 Example of WAN Static IP Mode 2.
Cipherium bonalinx-W 1300 Administrator’ s Manual 3. PPPoE: If WAN Port uses the network environment connected by PPPoE, please select PPPoE, and set the username and password. Figure 5-24 WAN PPPoE Mode 3.1 Dial on Demand: When the Dial on Demand function is enabled under PPPoE, it allows users to have the maximum idle time.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.1.4. Authentication Configuration bonalinx-W 1300 have two ports need to authenticate , one is General Public LAN , the other is Wireless port. Figure 5-26 Authentication Configuration 1.
Cipherium bonalinx-W 1300 Administrator’ s Manual ΘIP PNP: At the user end, you can use any IP address to connect to the machine at the Public LAN section; no matter what the IP address at the user end is, you can obtain the Public LAN from bonalinx-W 1300 and access the network resources properly. Suppose you had used static IP address and specified IP address, Subnet Mask, Default Gateway and DNS.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-29 Enable the DHCP Server on Public LAN If you want to use the Reserved IP Address List function, please click the hyperlink of the Reserved IP Address List on the management interface. Then, the setup of the Reserved IP Address List as shown in the following figure will appear. Please enter the related Reserved IP Address, MAC, and description (not compulsory) on the management interface.
Cipherium bonalinx-W 1300 Administrator’ s Manual (3) Enable DHCP Relay Ǻ If you want to enable the DHCP Relay mode, you must specify other DHCP Server IP Address. Figure 5-31 2.
Cipherium bonalinx-W 1300 Administrator’ s Manual SSID : The SSID is the unique name shared among all devices in a wireless network. The SSID must be the same for all devices in the wireless network. It is case sensitive, must not exceed 32 characters, and may be any keyboard character. Chanel : Select the appropriate channel from the list provided to correspond with your network settings, between 1 and 11 (in North America).
Cipherium bonalinx-W 1300 Administrator’ s Manual Mode : There have two types that you can select , HEX and ASCII. Relate to Advance setting : Please click the hyperlink of Advance. Figure 5-34 Advance setting of Wireless Authntication Type : The default is set to Auto, where it auto-detects for Shared Key or Open System. Shared Key is when both the sender and the recipient share a WEP key for authentication. Open Key is when the sender and the recipient do not share a WEP key for authentication.
Cipherium bonalinx-W 1300 Administrator’ s Manual many Wireless-G devices are present. However, performance of your Wireless-G devices may be decreased. Basic Rates : The SNMP screen allows you to customize the Simple Network Management The default value is set to Default. Depending on the wireless mode you have selected, a default set of supported data rates will be selected. The default setting will ensure maximum compatibility with all devices.
Cipherium bonalinx-W 1300 Administrator’ s Manual awaken to receive the broadcast and multicast messages. Layer2 Client Isolation : You can enable this function to isolate 2 different domain or just Disable from system default. EX:10.2.3.4 can’t see 10.2.4.
Cipherium bonalinx-W 1300 Administrator’ s Manual Related Setup for DHCP Server of Public LAN DHCP Server has three choices: Disable DHCP Server, Enable DHCP Server, AND Enable DHCP Relay 1. Disable DHCP Server: Disable the function of the DHCP Server. Figure 5-36 2. Disable the DHCP Server on Wireless Enable DHCP Server: Enable the functions of the DHCP Server.
Cipherium bonalinx-W 1300 Administrator’ s Manual If you want to use the Reserved IP Address List function, please click the hyperlink of the Reserved IP Address List on the management interface. Then, the setup of the Reserved IP Address List as shown in the following figure will appear. Please enter the related Reserved IP Address, MAC, and description (not compulsory) on the management interface. After the information is keyed, click “ Apply” to complete the setup. Figure 5-38 3.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.1.5. Private Configuration Set up the Specific Route Profile rule, execution mode, IP address, and Subnet Mask of Private LAN Port as shown in the following figure. Figure 5-40 Example of Private LAN Interface Specific Route Profile: From the pull-down menu, select your desired Specific Route Profile rule or select “None”. Mode: It provides two modes: NAT Mode and ROUTER Mode.
Cipherium bonalinx-W 1300 Administrator’ s Manual IP Address: Enter your desired IP address for the setup. Subnet Mask: Enter your desired Subnet Mask for the setup. Related Setup of DHCP Server of Private LAN Port DHCP Server provides 3 choices: Disable DHCP Server, Enable DHCP Server, and Enable DHCP Relay. 1. Disable DHCP Server: Disable the DHCP Server function. Figure 5-41 Disable DHCP Server on Private LAN 2.
Cipherium bonalinx-W 1300 Administrator’ s Manual If you want to use the Reserved IP Address List function, please click the hyperlink of the Reserved IP Address List on the management interface. Then, the setup of the Reserved IP Address List as shown in the following figure will appear. Please enter the related Reserved IP Address, MAC, and some description (not comp ulsory) on the management interface. After the information is keyed in, click “Apply” to complete the setup.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.2. User Authentication This option provides the Administrator the advanced set up for the system according to the following detailed items including Authentication Policies, Group Configuration, Black List Configuration, Guest User Configuration, Roaming Configuration, Additional Configuration and On-demand User configuration. 5.2.
Cipherium bonalinx-W 1300 Administrator’ s Manual Authentication Methods Configuration:Authentication method setup. Authentication Policy: The system provides 5 groups of the setup of your choice. Select the desired control group from the pull-down menu. Preferred Authentication Method: After selecting the item, it means that the selected setup control group as shown above is the preferred Authentication method.
Cipherium bonalinx-W 1300 Administrator’ s Manual specified accounts as shown in the following figure without being limited by the restrictions above. Figure 5-47 Exception Configuration Attribute : After the Public LAN, the bonalinx-W 1300 will obtain the user’s attributes related to the authenticated server. The Administrator can use certain attributes as the management rule for the setup. Logic: It has equal to, not equal to, larger than, smaller than, and include for your choice.
Cipherium bonalinx-W 1300 Administrator’ s Manual Five Authentication Methods: 1. Local The user’s account information is stored in bonalinx-W 1300. If you need to manage the user’s account, please click the hyperlink Local Users List on the Authentication Server interface to enter into the Account Management Interface .
Cipherium bonalinx-W 1300 Administrator’ s Manual Upload User Account: Click “Upload User Accounts” to enter into the Upload User Accounts interface. Click the browser button to select the text file for the user account. Then click “Submit” to complete the upload. The format of the uploading file is text file, and each line represents a User Account, FormatÆ Username,Password,MAC,Remark each parameter is separated by a comma, and no space is allowed between MAC Remark but the comma is still needed.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-50 Added User Accounts Screen Figure 5-51 Example of Editing User Accounts Figure 5-52 Example of Upload User Account Interface 66
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-53 Example of Download User Account Interface 2. POP3 If POP3 is used for the Public LAN, you just need to set the Public LAN mechanism to POP3. The setup for primary server or secondary server is available. Enter the IP address or domain name of the Primary POP3 Server and its Primary POP3 Server port. Such setup will be enabled immediately after you click the “Apply” button. (It is not compulsory to set up the Secondary POP3 Server).
Cipherium bonalinx-W 1300 Administrator’ s Manual Enable SSL Connection: If you select this option, the Authentication will be done by POP3 Protocol. 3. RADIUS The external Authentication for user accounts is set by the RADIUS server. The setup for primary server or secondary server is available, and such setup will be enabled immediately. 802.1X Public LAN: Select to enable 802.1X as needed. Click the hyperlink “Edit” to enter into the edit interface of the 802.1X.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-55 RADIUS Setup Screen 4. LDAP You can select a primary server or secondary server as the LDAP server for Public LAN. If you select the LDAP Authentication method, it is necessary to key in the IP Address (Domain Name ), Port number, Base DN Data of LDAP Server. After you confirm the data, please click “ Apply”.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-56 LDAP Setup Screen 5. NT Domain You just need to key in the IP address of the Domain Controller Server and determine whether or not to enable the Transparent Login function to use the NT Domain server for Authentication.
Cipherium bonalinx-W 1300 Administrator’ s Manual Transparent Login: It sets up whether or not to log in the bonalinx-W 1300 after a user logs in the Windows Domain. Caution: 1. At present, it only supports win2000 domain controller . 2. If you want to use NT Domain Autheneication, Please make sure 2.1 WAN port Preferred DNS Server IP address is Domain Controller Server IP address 2.2 Walled Garden List is also key in Domain Controller Server IP address. 2.3. Policy Name is Your complete Domain Name 5.2.
Cipherium bonalinx-W 1300 Administrator’ s Manual Firewall Profile: The firewall profile that goes with the system. Specific Route Profile: The route profile that goes with the system. Schedule Profile: It sets up the schedule that goes with logging in to the system. Bandwidth: The bandwidth that goes with the system. 5.2.3 Black List Configuration The bonalinx-W 1300 provides a black list function for the system. The Administrator can add, delete, or edit a specific black list.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-60 Example of Adding User to Black List After you enter the ID of a user into the black list, click “ Apply”. For example, If you successfully add the user b1 into the black list, the system will display a message to inform the Administrator. User ‘b1’ has been added! After clicking “Previous”, you will return to the Black List Configuration.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-61 Example of Deleting a User from Black List 5.2.4 Guest User Configuration When you select Active Guest User, you can open the Guest User Configuration as shown in the following figure. Figure 5-62 Guest User Configuration Management Interface Guest User List: The bonalinx-W 1300 provides 10 groups for the Guest User List.
Cipherium bonalinx-W 1300 Administrator’ s Manual User, it is necessary to click “Apply” to enable this function. Figure 5-63 Example of Guest User Management Interface 5.2.5 Roaming Configuration The system provides bonalinx-W 1300 and GRIC Server for roaming, and you only need to set up the related parameter in this page to let the user of the GRIC Server use the bonalinx-W 1300. These settings will be effective immediately after you click the “Apply” button.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-64 Roaming Configuration Below is a GRIC example: bonalinx-W 1300 Authentication Port IP address: 192.168.1.254 Username: xyz, and his IP address: 192.168.1.100 Password: xyz MAC address: 01:23:45:67:89:ab The gric.shtml example should like this: https://192.168.1.254/loginpages/gric.shtml?uname=xyz&uip=192.168.1.100&up wd=xyz&umac=01:23:45:67:89:ab User can also use browser to key in GRIC\username or username@GRIC on ID field and user’ s passw
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.2.6 Additional Configuration Figure 5-65 Additional Configuration User Control: It is applied to the rules for setting general users. Logout Timer Ǻ If a user has idled and not used the network for a while, the system will automatically log out the user. Such logout time can be set in the range of 1~1440, and the default logout time is 10 minutes.
Cipherium bonalinx-W 1300 Administrator’ s Manual information and provide you with a logout button for the logout. If you click this option, it will close such window and provide a logout function. If you do not select this option, closing the window will not log out the user.
Cipherium bonalinx-W 1300 Administrator’ s Manual for the user to key in username and password. Figure 5-67 HTML Instructions Required for Using User-Defined Interface
Cipherium bonalinx-W 1300 Administrator’ s Manual The difference resides on that your user-defined user logout interface must include the following HTML codes to provide users a channel to enter the username and password. Figure 5-72 HTML Codes Required for User Logout Interface
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-75 Receipt Information Welcome! -----------------------Username: Cipher Password: q6m34m3b Price: US$2 Usage: 60 minute(s) -----------------------ESSID: dlink Shared WEP Keys (HEX 40 bit): -----------------------Valid to use until: 2003/09/09 12:46:56 -----------------------Thank You! 2004 83
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-76 Figure 5-77 On-demand User Configuration On-demand User Page Field and Description Description Field You can specify the prefix of the user name, max is 8 char. , for Store Name example: D-Link. Account Range You can specify the max user amount, max is 2000 Receipt Header You can configure the receipt’ s header in this filed. Receipt Footer You can configure the receipt’ s footer in this filed.
Cipherium bonalinx-W 1300 Administrator’ s Manual You can specify the billing rule for on-demand user, either by data Billing Rule transfer or session length for user’s online access. Ƿ On-demand User List: A list about on-demand user. A sample list is shown below. Figure 5-78 On-demand User List To delete specific users accounts, click on the checkboxes besides those user accounts then click the Delete button. To delete all user accounts, click Delete All.
Cipherium bonalinx-W 1300 Administrator’ s Manual Data Transfer: The total of data size for on-demand user. Account Expire Date: The number of days for user to activate his/her account, after issue of the account number. Validity Duration: The account will remain valid after this number of days; prior that user has activated his/her account. Price: Price for the online access.
Cipherium bonalinx-W 1300 Administrator’ s Manual Ƿ Upload On-demand User: Figure 5-81 Upload On-demand User Billing rule: By data transfer: the size of transfer data. By session length: the logon hours. Remark: The billing rule while uploading a user account must be identical to the one previously setup for on-demand user. Upload User Account: upload a user account.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.3 Group Profile The bonalinx-W 1300 provides three kinds of Profile configurations, including Firewall Profile, S pecific Route Profile, and Login Schedule Profile. 5.3.1 Firewall Profile The system has a default for Global and 5 firewall profiles. If you want to set up the firewall rules to suit all users, you can set such firewall profile in Global, and the other 5 firewall profiles can be set without affecting each other.
Cipherium bonalinx-W 1300 Administrator’ s Manual Filter Rule Item: The filter rule uses a serial filter to determine the permission for the transmission from the source address to the target address or examine whether there is a data loss. Please click Index Number for the detailed information.
Cipherium bonalinx-W 1300 Administrator’ s Manual Rule Name : Name this IP Filter rule. Enable this Rule: Such rule will be effective when selected. Action: If your set rule is matched, PassǺThe packet passes successfully. BlockǺThe packet is blocked. Protocol : Provides three kinds of protocols: TCP, UDP, and ICMP for your choice. All stands for all three protocols chosen. Source MAC: Source Address of the MAC Address.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.3.2 Specific Route Profiles The bonalinx-W 1300 system provides the route profile setup function to let the Administrator use the route profile to determine the network path which suits all routers best and send the packet to the destination through the network. The Administrator can use the pull-down menu to select and set your desired route profile. Figure 5-85 Example of Editing Specific Route Profile Profile Name: Name this Specific Route Profile.
Cipherium bonalinx-W 1300 Administrator’ s Manual Subnet Netmask: It specifies the netmask destination, and the subnet mask of 192.168.202.0 is taken for example. Gateway IP Address: It specifies the IP address for the next connected router. The setting here is 192.168.200.253 because it is behind the router at 192.168.202.0. Caution: Allow two machine to access data from each other, and add static route to the next connected router in order to send all packets of 192.168.100.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.4 Network Configuration Five functions are provided to control individual jobs of the network transmission, which include Network Address Translate, Privilege List, Walled Device list, and Proxy Server Properties. 5.4.1 Network Address Translate 1. Static Assignments If you have several IP addresses, you can assign them to the WAN port of the bonalinx-W 1300.
Cipherium bonalinx-W 1300 Administrator’ s Manual 2. Public Accessible Server The function of this item permits you to define at most 40 virtual servers, so that the computer other than that of the managed network can access the server in the managed network. According to the different services provided, the network service can be provided on the TCP port or UDP port, or both. These settings will be effective immediately after you click “Apply”. Figure 5-88 Defining Public Accessible Server 3.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-89 IP Address and Network Port Redirect 5.4.2 Privilege List 1. Privilege IP Address List Although all devices at the user end are managed, sometimes you still need to have a user end with some exception processing. For example, if the server has been put on the managed network and you want to login to the network from such server without going through the Public LAN.
Cipherium bonalinx-W 1300 Administrator’ s Manual Warning: Permitting specific IP address to have network access rights without going through the Public LAN may cause security problems. Figure 5-90 Privilege IP Address 2. Privilege MAC Address List Besides permitting specific devices at user end to have the network access right without going through the Public LAN according to the IP address at the user end, the system also provides a way to do so according to the MAC address at the user end.
Cipherium bonalinx-W 1300 Administrator’ s Manual Warning: Permitting specific IP address to have network access rights without going through the Public LAN may cause security problems. Figure 5-91 Direct Connecting MAC Address 5.4.3 Monitor IP List The system will send out the packet regularly to monitor and control the status of the machine on the list.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-92 Monitor IP List Sender: The email address of administrator server who is in charge of the monitoring. Receiver: The email address of a predefined IP user who is being monitored. Interval: The interval time for administrator server to dispatch a warning or an instruction message.
Cipherium bonalinx-W 1300 Administrator’ s Manual Monitor IP list: The list of the IP addresses to be taken under surveillance. Monitor: Show monitor IP status. (Figure 5-93) Figure 5-93 Monitor IP result 5.4.4 Walled Garden List This system permits users to login to certain websites before passing through the Public LAN. You only need to enter the IP address (or Domain Name) of these websites into the Walled Garden List. You can enter up to 20 addresses into this list.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-94 Defining Walled Garden Server Address 5.4.5 Proxy Server Properties Internal Proxy Server: bonalinx-W 1300 built-in proxy server, if you active this function, end user can specify bonalinx-W 1300 as proxy server, no need to enter the IP address and Port.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-95 Proxy List 101
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.5 Utilities This function provides utilities for you to customize and maintain your system including Change Password, Backup/Restore Strategy, Firmware Upload, and Restart. 5.5.1 Change Password To change the Administrator’s password, please key in the present Administrator’s Password on the interface, and then the new Administrator’s Password. You must key in the new password twice for confirmation purposes.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-97 Backup and Restore Import Active Strategy: Generate the backup (image) file. Load Strategy: It loads the backup graphic file for the setup status (Caution: Such graphic file must be generated by the bonalinx-W 1300). Resetting to the Factory-Default configuration: Restore to the default setting of the bonalinx-W 1300.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.5.3 Firmware Upgrade You can upgrade your bonalinx-W 1300 firmware from the Cipherium website. Figure 5-98 Executing the Firmware Upgrade Warning: Firmware upgrade may cause data loss on setup. Please refer to the version description to see if there is any limitation before upgrading your firmware. Click “Browse” to browse the files.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.5.4 Restart This function allows you to safely restart the bonalinx-W 1300. It takes about three minutes to restart the bonalinx-W 1300. If you need to turn off the power of the bonalinx-W 1300, we recommend you to restart the bonalinx-W 1300, and turn off the power after you hear a beep. Figure 5-99 Restart Caution: All online users connected to the system will be disconnected when the system is restarted. 5.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-100 System Status Example Figure 5-101 System Status Description Item Description Firmware Version The firmware version is currently used by the bonalinx-W 1300 System Name System name, and the default is bonalinx-W 1300 Administrator’s related information will be shown on the login Administrator Info screen when a user has a connection problem.
Cipherium bonalinx-W 1300 Administrator’ s Manual Succeed Page The starting screen after a user logs on successfully. Syslog To The IP address and port number of the external Syslog Server Proxy Server Proxy Server is not set. When the connection at WAN is abnormal Internet Connection Detection (Internet Connection Detection), all online user can log on to the network. It permits a specific IP address to set up the bonalinx-W 1300 Remote Manage IP Manage SNMP from the WAN port.
Cipherium bonalinx-W 1300 Administrator’ s Manual 5.6.2 Interface Status By this function, you can set the information of each interface including WAN port, Wireless port, Public LAN, and Private LAN Port.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-103 Interface Status Example Description Item WAN Wireless MAC Address The MAC address of the WAN port IP Address The IP address of the WAN port Subnet Mask The Subnet Mask of the WAN port Mode Wireless port mode: NAT mode MAC Address The MAC address of the Wireless port IP Address The IP address of theWireless port Subnet Mas The Subnet Mask of the Wireless port ESSID The ESSID of the Wireless port Channel The Channel of Wirel
Cipherium bonalinx-W 1300 Administrator’ s Manual Subnet Mask The Subnet Mask of the Private LAN port Status Enable the DHCP function on the Private LAN port WINS IP Address Set the WINS server IP address on the DHCP server Private Start IP Address DHCP pool start IP address DHCP Server End IP address DHCP pool end IP address Lease Ti me The lease time of the IP address 5.6.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-105 History Example Caution: Since the history is saved in DRAM, if you need to restart the bonalinx-W 1300 and want to keep the history, then please manually duplicate the history. If you have entered the Administrator’s e-mail address in the system configuration interface, then the system will automatically send out the history of the previous day to such e-mail address.
Cipherium bonalinx-W 1300 Administrator’ s Manual Figure 5-107 DHCP Server Reporting Example 5.6.6 Notify Configuration The bonalinx-W 1300 will save the history into the internal DRAM. If you want to automatically send the history to your email address, please enter your e-mail address in the receiver field. Figure 5-108 Notify Configuration Example Sender: The email address of administrator server who is in charge of the history bookkeeper.
Cipherium bonalinx-W 1300 Administrator’ s Manual 6 Technical Support If you have any other technical questions, feel free to contact our technical support department: support@cipherium.com.
Cipherium bonalinx-W 1300 Administrator’ s Manual 7 Appendix - Windows TCP/IP Setup If you have not changed the factory default settings of the bonalinx-W 1300 bonalinx-W 1300 and Windows 95/98/ME/2000 TCP/IP, it is not necessary to make any modification here. With the factory default settings, the bonalinx-W 1300 bonalinx-W 1300 will automatically assign an appropriate IP address (and related information) to each PC after the PC has been booted.
Cipherium bonalinx-W 1300 Administrator’ s Manual 2. Select the TCP/IP communication protocol of the network card, and then click “Properties”. Using DHCP If you want to use DHCP, please select “Obtain an IP Address Automatically”, which is also the default setting of Windows. Reboot the PC to make sure an IP address is obtained from the bonalinx-W 1300 bonalinx-W 1300.
Cipherium bonalinx-W 1300 Administrator’ s Manual Using Specific IP Address If you have completed the setup for your PC, please inform the network administrator before modifying the following setup. 1. If the DNS Server column is blank, please click “ Enable DNS” , and then enter the DNS address or the DNS address provided by ISP. After this procedure is completed, click “OK” .
Cipherium bonalinx-W 1300 Administrator’ s Manual 2. Click the “ Gate way” icon, and enter the IP address of the bonalinx-W 1300 bonalinx-W 1300 in the new gateway. After this procedure is completed, click “ Add” (You can ask the network administrator for the IP address specified for the bonalinx-W 1300 bonalinx-W 1300).
Cipherium bonalinx-W 1300 Administrator’ s Manual 7.4 Check the TCP/IP Setup of Windows 2000 1. Select Start - Console – Network and Dial-up Connections. 2.
Cipherium bonalinx-W 1300 Administrator’ s Manual ȸPropertiesȹ. 3. Select Internet Protocol(TCP/IP), and then click “Properties”.
Cipherium bonalinx-W 1300 Administrator’ s Manual also the default setting of Windows. Reboot the PC to make sure an IP address is obtained from the bonalinx-W 1300 bonalinx-W 1300. Using Static IP Address If you have completed the setup for your PC, please inform the network administrator before modifying the following setup. 1. Click “ Advanced” in the window of Internet Protocol (TCP/IP).
Cipherium bonalinx-W 1300 Administrator’ s Manual 2. Click the “IP Settings” icon, and then “Add” in the “Default Gate ways” column to enter the IP address of the bonalinx-W 1300 bonalinx-W 1300. is completed, click “Add” . After this procedure (You can ask the network administrator to give you the IP address specified for the bonalinx-W 1300 bonalinx-W 1300.
Cipherium bonalinx-W 1300 Administrator’ s Manual 3. If the DNS Server column is blank, please click “ Using the following DNS Server Address” in the window of Internet Protocol (TCP/IP), and then enter the DNS address or the DNS address provided by ISP. After this procedure is completed, click “OK” .
Cipherium bonalinx-W 1300 Administrator’ s Manual 7.5 Check the TCP/IP Setup of Windows XP 1. Select Start - Console – Network Connection. 2. Click the right button of the mouse on the “Local Area Connection” icon to select “Properties”. 3. Click the “General” icon, and then select “Internet Protocol(TCP/IP)”. “Properties”.
Cipherium bonalinx-W 1300 Administrator’ s Manual Using DHCP If you want to use DHCP, please select “Obtain an IP Address Automatically”, which is also the default setting of Windows. Reboot the PC to make sure an IP address is obtained from the bonalinx-W 1300 bonalinx-W 1300.
Cipherium bonalinx-W 1300 Administrator’ s Manual Using Static IP Address If the setup for your PC is completed, please notice the network administration staff before changing the following settings. 1. Click “Advanced” in the Internet Protocol (TCP/IP) window. 2. Click the “IP Settings” icon, and enter the IP address of the bonalinx-W 1300 bonalinx-W 1300 in the “Default Gate ways” column, and then click “Add” After this procedure is completed, click “OK” .
Cipherium bonalinx-W 1300 Administrator’ s Manual 3. If the DNS Server field is blank, please click “Using the following DNS Server Addresses” in the Internet Protocol (TCP/IP) Window, and key in the DNS address or DNS address provided by ISP.
Appendix A Statements FCC CAUTION This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
CE CAUTION European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835 GHz; In France, the equipment must be restricted to the 2.4465-2.4835 GHz frequency range and must be restricted to indoor use.
IC CAUTION “ To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.” “ Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
