User's Manual

Cipherium bonalinx-W 1300
Administrator’ s Manual
20
3.2.3. Begin Installation
After the bonalinx-W 1300 is connected to the network devices, you can start setting the
bonalinx-W 1300 to control your network environment. In the following sections, we will
guide you step by step to set up a system composed by individual bonalinx-W 1300.
3.2.3.1. Entering the Web Management Interface
1. Opening Browser
After the bonalinx-W 1300 is installed and the foregoing setup is completed, use the network
cable of the 10/100BaseT to connect to the Private LAN port, please open the browser (such as
Microsoft IE). In the website, enter the administrator’s URL such as https://192.168.2.254
.
IF you can’ t get the login screen, may be you wouldn’ t obtain an IP address automatically
from Private LAN port, please specify an IP address such as 192.168.2.xx then do it again.
2. Keying in the Administrator’s Username and Password
In the opened webpage, you will see the login screen as shown in Figure 3-3. Please key in
“admin” in the Username column, and then “admin” in the Password column. Click “Enter”
to login.
Figure 3-3 Administrator Login