User's Manual

Cipherium bonalinx-W 1300
Administrator’ s Manual
26
4. Console Interface
The interface of bonalinx -W 1300 provide 2 kinds of function,
A. The bonalinx-W 1300 provides a RJ11 interface for the manager to handle different
problems and situations for the operation. To link to the RJ11 interface of the bonalinx-W
1300, you need a modem cable. The terminal simulation program that you use, such as the
super terminal, should be set to the parameter value of 9600,8,n,1.
The main console is a basic interface using interactive dialog boxes. Please use the arrow
keys on the keyboard to browse the menu and press the “Enter” key to select specific
menus and confirm entered data.
B. It’s also can be as a printer interface which connect to specific thermal line ticket
generation printer.
Warning: These two functions can’t be used by the same time.
4.1. Main Menu of Console interface
Once you properly connect to the serial port of the bonalinx-W 1300, the console welcome
screen will appear automatically. If the welcome screen does not appear in the terminal
simulation program automatically, please try to press the “Down” arrow key, so that the
terminal simulation program will send some commands to the serial port of the bonalinx-W
1300, and the welcome screen or the main menu will appear again. If you are still unable to
see the welcome screen or the main menu of the console, please check if the connection of
your cables and the setup of the terminal simulation program are correct.
Figure 4-1 Main Menu of bonalinx-W 1300 Console Interface