User's Manual

Cipherium bonalinx-W 1300
Administrator’ s Manual
28
6. Display system up time: The system up time of the bonalinx-W 1300 is displayed.
7. Check service status: The current execution status of each service on the bonalinx-W 1300
is checked.
8. Set device into “safe mode”: If administrator is unable to use Web Management Interface
on the browser while bonalinx-W 1300 is unexplicit failure. He can choose this utility and
set bonalinx-W 1300 into safe mode, then administrator can management this device with
browser again.
9. Synchronize clock with NTP server: Specify and immediately check and correct the clock
through the NTP protocol and network time server. Since the bonalinx-W 1300 does not
support manual setup for its internal clock, therefore we must reset the internal clock
through the NTP.
4.3. Change admin password of Console interface
Besides supporting the use of console management interface through the connection of null
modem, the bonalinx-W 1300 also supports the SSH online connection to connect to the
bonalinx-W 1300 for the setup. When using a null modem to connect to the bonalinx-W 1300
console, we do not need to enter administrator’s password to enter the console management
interface.
When SSH is used to connect the bonalinx-W 1300, the username is “admin” and the default
password is also “admin”. The set values are the same as those for the Web management
interface. You can use this option to change the bonalinx-W 1300 administrator’s password.
Even if you forgot the password and are unable to login the console management interface of
the bonalinx-W 1300 from the Web or the remote end of the SSH, you can still use the null
modem to connect to the console management interface of the bonalinx-W 1300 and set the
administrator’s password again.