User's Manual

Cipherium bonalinx-W 1300

Administrator’ s Manual

ΘIP PNP: At the user end, you can use any IP address to connect to the machine at the Public

LAN section; no matter what the IP address at the user end is, you can obtain the Public

LAN from bonalinx-W 1300 and access the network resources properly. Suppose you had

used static IP address and specified IP address, Subnet Mask, Default Gateway and DNS.

ΘUser Public LAN: You can choose to Enable or Disable user Public LAN, if you enable user

authentication, you have to define Specific Route Profile to user .

ΘSpecific Route Profile: To define specific route for user to access internet.

ΘOperation Mode: It provides two modes: NAT Mode and ROUTER Mode.

ΘIP Address: Enter your desired IP address for setup.

ΘSubnet Mask: Enter your desired Subnet Mask for setup.

Related Setup for DHCP Server of Public LAN

DHCP Server has three choices: Disable DHCP Server, Enable DHCP Server, and Enable

DHCP Relay.

(1) Disable DHCP Server: Disable the function of the DHCP Server.

Figure 5-28 Disable the DHCP Server on Public LAN

(2) Enable DHCP Server: Enable the functions of the DHCP Server. Appropriate setup is

needed for the normal enabling of the DHCP server, and the setup information for the

DHCP Server includes DHCP Scope Start IP Address, End IP Address, Preferred DNS

Server, Alternate DNS Server, Domain Name, WINS Serve, and Reserved IP Address List.