User's Manual

Cipherium bonalinx-W 1300
Administrator’ s Manual
53
Mode : There have two types that you can select , HEX and ASCII.
Relate to Advance setting : Please click the hyperlink of Advance.
Figure 5-34 Advance setting of Wireless
Authntication Type : The default is set to Auto, where it auto-detects for Shared Key or
Open System. Shared Key is when both the sender and the recipient share a WEP key for
authentication. Open Key is when the sender and the recipient do not share a WEP key for
authentication. All points on your network must use the same authentication type.
Transmission Rates : The default setting is Auto. The range is from 1 to 54Mbps. The rate of
data transmission should be set depending on the speed of your wireless network. You can
select from a range of transmission speeds, or you can keep the default setting, Auto, to have
the Access Pointautomatically use the fastest possible data rate and enable the Auto-Fallback
feature. Auto-Fallback will negotiate the best possible connection speed between the Access
Point and a wireless client.
CTS Protection Mode : The default value is set to Disabled. When set to Auto, a protection
mechanism will ensure that your Wireless-B devices will connect to the Access Point when