User's Manual

Cipherium bonalinx-W 1300
Administrator’ s Manual
55
awaken to receive the broadcast and multicast messages.
Layer2 Client Isolation : You can enable this function to isolate 2 different domain or just
Disable from system default.
EX:10.2.3.4 can’t see 10.2.4.4
Figure 5-35 Wireless Port Configuration(2)
IP PNP: At the user end, you can use any IP address to connect to the machine at the
Public LAN section; no matter what the IP address at the user end is, you can obtain the
Public LAN from bonalinx-W 1300 and access the network resources properly. Suppose you
had used static IP address and specified IP address, Subnet Mask, Default Gateway and DNS.
User Public LAN: You can choose to Enable or Disable user Public LAN, if you enable user
authentication , you have to define Specific Route Profile to user .
Specific Route Profile: To define specific route for user to access internet.
Operation Mode : It provides two modes: NAT Mode and ROUTER Mode.
IP Address: Enter your desired IP address for setup.
Subnet Mask: Enter your desired Subnet Mask for setup.