User's Manual

Cipherium bonalinx-W 1300
Administrator’ s Manual
58
5.1.5. Private Configuration
Set up the Specific Route Profile rule, execution mode, IP address, and Subnet Mask of
Private LAN Port as shown in the following figure.
Figure 5-40 Example of Private LAN Interface
Specific Route Profile: From the pull-down menu, select your desired Specific Route Profile
rule or select “None”.
Mode: It provides two modes: NAT Mode and ROUTER Mode.
NAT ModeǺAll IP addresses externally connected through the Private LAN Port (these
IP address must belong to the same network for the Private LAN Port) will be
converted into the IP address of the WAN Port by the bonalinx-W 1300 and connected
to the outside.
Router ModeǺAll IP addresses externally connected through the Private LAN Port use
its own IP address for external connections. Then, the bonalinx-W 1300 acts like a
Router.