User's Manual

AirLive WIAS-1200G
User’s Guide
32
y Wireless Configuration
SSID: The SSID is the unique name shared among all devices in a wireless network. The SSID must be the
same for all devices in the wireless network. It is case sensitive, must not exceed 32 characters and may be any
character on the keyboard.
Sync to Ticket: Synchronize the SSID of ticket with this system.
Channel: Select the appropriate channel from the list to correspond with your network settings; for example, 1
to 11 channels are suitable for the North America area. All points in the wireless network must use the same
channel in order to make sure correct connection.
Transmission Mode: There are 2 modes to select from, 802.11b (2.4G, 1~11Mbps) and 802.11 (b+g) (2.4G,
1~11Mbps and 2.4G, 54Mbps).
SSID Broadcast: Select to enable the SSID broadcast in the network. When configuring the network, this
function may be enabled but should be disabled when configuration is finished. Since when SSID Broadcast is
enabled, someone could easily obtain the SSID information with the site survey software and get unauthorized
access to the network.
Layer2 Client Isolation: This function can be enabled to isolate any client from each other.
Security: For security settings in detail, please click the hyperlink Security to go into the Security page.
Choose “Enable” to configure the setting.
1. WEP Key: Wired Equivalent Privacy. If using this function is desired, please choose “Enable”.
2. WEP Key Encryption: This is a data privacy mechanism based on a 64-bit or 128-bits shared key
algorithm.
3. Mode: There are two types of encryption, HEX and ASCII. After selecting one of them, please enter the
related information in the blanks below.