User guide

MIRROR 5250 Emulator

User Guide

4.7.3 KEY MAPPING

By default, FN+1 ~ FN+9, FN+0 are mapped to PF1 ~ PF9, PF10 (Program Function

keys). Click an available function key and change its mapping to meet a specific need.

Note: The function key mapping list varies by the mobile computer and keypad layout. If

a specific key is not available on the physical keypad, its associated key mapping

may not take effect.

For example, the following function keys may be required during a telnet session.

Function Key

Mapped to Remarks

Any available key F3 Exit the sign-on request.

Any available key F12 Cancel a task.

Any available key Switch Key See 2.2 RFID Reader

Tab or any other key NEXT See 3.5.1 Login – Username/Password

Any available key Name Key See 3.5.1 Login – Username/Password

Any available key Password Key See 3.5.1 Login – Username/Password

Any available key Navigator Key See 4.2.2 Navigator Key.

Any available key Message Key See 4.3 Message.

4.8 RESET

Click Reset to load the default settings.

Note: The current settings will be cleared.