User guide

64
MIRROR 5250 Emulator User Guide
Covnert RSS to
UPC/EAN
“Convert to UPC/EAN” only applies to GS1 Databar-14 and
GS1 Databar Limited barcodes not decoded as part of a
Composite barcode.
Convert to EAN-13
Strip the leading “010” from barcodes.
 “01” is the Application ID and must be followed by a
single zero (the first digit encoded)
Convert to UPC-A
Strip the leading “0100” from barcodes.
 “01” is the Application ID and must be followed by
two or more zeros (but not six zeros)
No
EAN-8 Enable
Convert to EAN-13 The EAN-8 barcode will be expanded into EAN-13, and the
next processing
will follow the settings configured for
EAN-13.
No
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
EAN-13 Enable
Bookland EAN (ISBN) The EAN-13 barcode starting with 978 will be converted to
ISBN.
No
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
UPC-A Enable
Transmit Check Digit Decide whether to include the UPC-A check digit in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-A preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
UPC-E0 Enable
Transmit Check Digit Decide whether to include the UPC-E0 check digit in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-E0 preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
Convert to UPC-A The UPC-E0 barcode will be expanded into UPC-A, and the
next processing will follow the settings configured for
UPC-A.
No
UPC-E1 Disable
Transmit Check Digit Decide whether to include the UPC-E1 check digit in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-E1 preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.