MIRROR VT Terminal Emulation For 8 Series Mobile Computers: 8000 / 8300 / 8400 / 8500 DOC Version 2.
Copyright © 2006~2010 CIPHERLAB CO., LTD. All rights reserved The software contains proprietary information of CIPHERLAB CO., LTD.; it is provided under a license agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited. Due to continued product development this information may change without notice.
RELEASE NOTES Version Date Notes 2.27 Dec.
2.21 2.20 2.10 Mar. 03, 2009 Jan. 16, 2009 July 17, 2008 Modified: 1.6 Download & Baud Rate — remove “RF” Modified: Getting Started – add hot keys F1, F2, F3 and F9 Oct. 02, 2007 June 12, 2006 Modified: remove Bluetooth-related descriptions (3560 phased out) New: “Special ESC Commands & Hardware Test” section Modified: 2.3.2 Scanner – remove special ESC commands Modified: 2.5 Hardware Test – remove Modified: 4.1 Emulation Type – remove vt102, ANSI Modified: 4.4.
CONTENTS RELEASE NOTES .............................................................................................................................. - 3 INTRODUCTION .................................................................................................................................... 1 System Requirements....................................................................................................................... 2 Features.............................................................
MIRROR VT Emulator User Guide 2.3.2 Scanner............................................................................................................................. 23 2.3.3 Data................................................................................................................................... 24 2.3.4 Good Read (Good Feedback) ..........................................................................................24 2.3.5 Error Feedback .................................................
MIRROR VT Emulator User Guide 5.2.1 Logon to Host ...................................................................................................................42 5.2.2 Capture Host Screens ...................................................................................................... 43 5.3 Reformat Host Screens ............................................................................................................44 5.3.1 Host Screen ........................................................
INTRODUCTION Seeing the need to combine wireless connectivity and telnet terminal emulation, MIRROR VT Emulator, also known as CipherNet-VT, is designed to provide telnet terminal emulation on the 8000/8300/8400/8500 Series Mobile Computers, which are capable of 802.11b/g or GPRS connectivity. The software, consisting of CipherNet programs (.exe) and the associated runtime (.
MIRROR VT Emulator User Guide SYSTEM REQUIREMENTS To run the program, one of the Windows operating system is required: Windows 2000 Windows XP Windows Vista Windows 7 FEATURES CipherNet-VT supports VT100 and VT220 terminal emulation Can automatically insert data into an input field in the host application via reading barcodes or RFID tags 2 Easy cloning by saving user settings to a configuration file (.NET) Supports auto sign on, cursor tracking, etc.
Introduction GETTING STARTED 1) Run CipherNet-VT.exe from the Product CD. 2) Click OK to accept the End-User License Agreement (EULA). 3) Download the runtime program (.SHX) to the mobile computer via Utilities Menu | Download Program. Associated Runtime Programs 80xx-VT.SHX : Download this program file to 8071. 83xx-VT.SHX : Download this program file to 8330 or 8370. 84xx-VT.SHX : Download this program file to 8400 or 8470. 85xx-VT.SHX : Download this program file to 8500, 8570, 8580 or 8590.
MIRROR VT Emulator User Guide 6) Save the current user settings to a configuration file via File Menu | Save. 7) Download the configuration file (.NET) to the mobile computer via Utilities Menu | Download Settings. Refer to Alternatives to Download Settings. 8) From the CipherNet Runtime Menu on the mobile computer, select 1. Telnet to start a fresh new telnet session after downloading. The mobile computer will be associated with an access point and connected to a host.
Introduction ALTERNATIVES TO DOWNLOAD SETTINGS Auto-Detect & Download via Cradle-IR, RS-232 or USB Virtual COM Seat the mobile computer in the cradle or connect it with the RS-232/USB cable to PC. Select to download settings via Cradle-IR, RS-232 or USB Virtual COM. When the mobile computer is turned on, it will start to download terminal emulation settings right with the CipherNet Runtime Menu as long as the current settings on the mobile computer are matching.
MIRROR VT Emulator User Guide Download via IrDA Pointed the IrDA port on the mobile computer directly to the infrared port of another IR device, and select to download settings via IrDA. When the mobile computer is turned on, you must press F3 directly to start to download terminal emulation settings right with the CipherNet Runtime Menu as long as the current interface setting on the mobile computer is IrDA. Otherwise, you must press F1 to change the interface on the mobile computer to IrDA first.
Introduction WORKING WITH MENUS & TOOLBAR The menu bar contains a number of menus that specify which task you want the system to perform. Each menu contains a list of commands. FILE MENU Command Action… New To create a new configuration file for the telnet client. Refer to each chapter. Open To open an existing configuration file. File path needs to be specified. Save To save the current settings to a configuration file (.NET). Save As To save the current settings to a new file.
MIRROR VT Emulator User Guide Download Program The download properties will be saved to an initial file automatically. To download the runtime program (.SHX) to the target mobile computer. TELNET MENU Command Action… Connect To connect to a host. Click “Save Log” if necessary. Disconnect To disconnect with the host. Start Capture To start the Capture task with a file (.SCR) for saving host session screens. Capture To capture the current host session screen.
Introduction TOOLBAR The toolbar allows quick access to commands that are available in the current stage.
MIRROR VT Emulator User Guide SPECIAL ESC COMMANDS & HARDWARE TEST SPECIAL ESC COMMANDS For VT emulation, a number of special ESC commands are available for system information and hardware control. You may send an escape sequence from a host to get device type, serial number, or control the hardware features of the mobile computer.
Introduction Vibrator ESC[4;duration] System Time The vibrator will work for (duration *0.1) seconds. ESC[5;YYYYMMDDhhmmss] 8300/8400/ 8500 The mobile computer will reset date and time.
MIRROR VT Emulator User Guide BUZZER TEST You can test the buzzer by playing a beep sequence. 1) Turn on the mobile computer. The main menu created by the preloaded CipherNet Runtime appears. 2) On the mobile computer, select 2. Utilities | 1. TCP / IP Settings. IP :12 7. 0. 0. 1 1. Tel ne t 2. Uti li ti es SN :EB 70 00 00 1 F 1 . T CP /I P Se tt in gs 2 .E mu la ti on S et ti ng s 3 . R ea de r Te st 4 .B ac kl ig ht 5 .B at te ry V ol ta ge 6 .S et D at e & Ti me 7 .D ow nl oa d _Se tt in gs 8 .
Chapter 1 SYSTEM SETTINGS On this property page, system settings of the mobile computer can be changed. Once the configuration file (.NET) has been downloaded to the mobile computer, the new settings will take effect immediately and become the defaults. However, you still can change many of the settings directly on the mobile computer via CipherNet Runtime Menu or System Menu: CipherNet Runtime Menu — Press the Power key on the mobile computer. Backlight CipherNet Runtime Menu | 2. Utilities | 4.
MIRROR VT Emulator User Guide System Menu — Press 7, 9 and the Power key simultaneously on the mobile computer. Backlight System Menu | 2. Settings | 2. Backlight Period Power On System Menu | 2. Settings | 3. Auto Off System Menu | 2. Settings | 4. Power On Options Key Click System Menu | 2. Settings | 5. Key Click IN THIS CHAPTER 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 Power On.................................................................. Security ......................................................
Chapter 1 System Settings Security Option Remark TCP / IP Settings If selected and provided with a password, you will not be allowed to enter the following menu on the mobile computer unless the correct password is entered: CipherNet Runtime Menu | 2. Utilities | 1. TCP/IP Settings Emulation Settings If selected and provided with a password, you will not be allowed to enter the following menu on the mobile computer unless the correct password is entered: CipherNet Runtime Menu | 2. Utilities | 2.
MIRROR VT Emulator User Guide 1.5 MACRO FRAME Specify a macro frame if necessary. When starting a telnet session, the mobile computer will send a string of characters upon request from the server. 1.6 DOWNLOAD & BAUD RATE Click the drop-down menu to select a desired communications setting for the mobile computer to download the runtime and configuration file (*.NET). Remark Download Option Download via 8000/8300/8500: If USB-VCOM is selected, it is not necessary to configure the Baud Rate settings.
Chapter 2 BARCODE SETTINGS According to the requirements of a specific application, you may enable or disable any of the barcode symbologies and configure its associated parameters. Supported barcodes depend on the scan engine integrated on the mobile computer. IN THIS CHAPTER 2.1 2.2 2.3 2.4 Barcode Reader ......................................................... RFID Reader ............................................................. Advanced Settings ...................................................
MIRROR VT Emulator User Guide 2.1 BARCODE READER 2.1.1 SELECT READER TYPE Select a reader type that matches the hardware configuration of your mobile computer. The associated barcode reader settings, as well as the barcode parameters (= symbology settings) will be displayed accordingly. For more information, refer to the following appendixes: Appendix I – Scan Engine Settings for information on the symbologies and RFID tags supported.
Chapter 2 Barcode Settings 2.2 RFID READER By default, the RFID reader is enabled to read UID only. Click the button to configure the associated settings. 2.2.1 DATA Read UID By default, the RFID reader is set to read tag UID (Unique Identification). UID: a permanent factory programmed unique identification (UID) code which is unique to each tag. Read Data Select the check box so that RFID data can be read.
MIRROR VT Emulator User Guide 2.2.2 WORKING MODE Toggle In this mode, only one reader can work at a time: either RFID or barcode reader. Control Options Working with the Switch Key Always Enabled The RFID reader is enabled after login; however, it will not work until you press the switch key. To stop it from working, press the switch key again. By ESC Command The RFID reader is disabled after login. It will not work until you send the ESC command to activate it and then press the switch key.
Chapter 2 Barcode Settings 2.2.4 READING MODE Trigger If selected, you may press the trigger to start each RFID reading. When working mode is set “Hybrid”, you can press the trigger to read an RFID tag or a barcode label depending on which one first comes in range. Continuous By default, the RFID reader works in a continuous way. It will keep on reading the same RFID tag until the tag is removed out of range.
MIRROR VT Emulator User Guide 2.3 ADVANCED SETTINGS These settings are provided to enhance the read operation via the barcode reader. 2.3.1 INPUT Check Leading Code The leading code refers to the digit in the start position of a barcode. Select the check box to verify the barcode input. When the leading code is found mismatching, the barcode will be discarded. Below are some examples.
Chapter 2 Barcode Settings Check Code Length By default, the maximum barcode length is 15. Select the check box so that it will perform a length check on the barcode according to the length setting. When the barcode is found longer than the specified length, it will be discarded. Read Partial Barcode By default, it will return the whole barcode that has been decoded. Select the check box so that it will return partial barcode according to the settings of the start position and maximum length.
MIRROR VT Emulator User Guide Feedback Controlled by ESC Command By default, only a pair of beep sequence is used to indicate a successful decoding of barcode. You may specify vibrator duration or have LED flashing as well. Otherwise, select the check box if you wish to send an escape sequence from the host to control the buzzer, vibrator, and LED light. Proceed to Good Feedback and Error Feedback. You may specify an escape sequence to signal a good read or error.
Chapter 2 Barcode Settings Beep Sequence A beep sequence refers to pairs of Beep Frequency(x) and Beep Duration(y). You may specify whether or not to have a beep when decoding of a barcode is done successfully. You may specify pairs of “x y” other than the default “0E 05”. Click the editing box and select from the Grid Control. Vibrator Specify how long the vibrator is turned on (in units of 0.1 second) to indicate a barcode has been read successfully. By default, the vibrator is turned off.
MIRROR VT Emulator User Guide 2.4 RESET Click Reset to load the default settings. This applies to the following settings — Reader Settings Barcode & Parameters Advanced Settings RFID Settings Note: The current settings will be cleared.
Chapter 3 WIRELESS LAN SETTINGS To establish a telnet connection to a host, WLAN networking settings must be configured correctly. Once the configuration file (.NET) has been downloaded to the mobile computer, the new settings will take effect immediately and become the defaults. However, you still can change many of the settings directly on the mobile computer via CipherNet Runtime Menu or System Menu: CipherNet Runtime Menu — Press the Power key on the mobile computer. IP CipherNet Runtime Menu | 2.
MIRROR VT Emulator User Guide System Menu — Press 7, 9 and the Power key simultaneously on the mobile computer. IP System Menu | 8. Next Page | 3. Wi-Fi Menu | 2. Network Setting System Menu | 8. Next Page | 3. Wi-Fi Menu | 3. WLAN Setting Security System Menu | 8. Next Page | 3. Wi-Fi Menu | 4. Security IN THIS CHAPTER 3.1 3.2 3.3 3.4 3.5 3.6 Local IP .................................................................... Host IP.....................................................................
Chapter 3 Wireless LAN Settings 3.2 HOST IP 3.2.1 HOST IP/NAME Specify the IP address or name of the host that you wish to access via telnet. 3.2.2 TELNET PORT Specify the telnet port number. Port 23 is assigned by default. 3.2.3 KEEP ALIVE During a normal telnet session, a host will send a checking packet to the mobile computer on a regular basis to maintain the connection. However, the host you access might not be configured to keep the session alive.
MIRROR VT Emulator User Guide 802.11b/g wireless network communications channel. Shared key authentication requires that the client configure a static WEP key. The client access will be granted only if it passed a challenge based authentication. Note: For Shared Key authentication, the active WEP key is used for authentication. 3.4.2 WEP KEY Select the check box to implement Wired Equivalent Privacy or Wireless Encryption Protocol (WEP) for data encryption.
Chapter 3 Wireless LAN Settings 3.5 LOGIN To successfully log on to a host, the following settings must be specified correctly. Note: After logging out properly, press ESC and FN (the function key) simultaneously to disconnect with the host and return to the main menu. 3.5.1 LOGIN Normally, the cursor will stay on the “Username” field waiting for input during a fresh new telnet session.
MIRROR VT Emulator User Guide 3.5.2 LOGOUT The logout command depends on the host applications. In order to exit the specific host application, you will have to send the correct command as required. Setting Remark Logout Specify the logout command that allows you to log off the host. It must be exactly the same string as displayed on the host screen. Shortcut Key By default, the shortcut keys are disabled. You will have to enter the logout command manually. Select the shortcut keys (FN+0 ~ FN+9).
Chapter 4 EMULATION SETTINGS To successfully emulate a VT terminal, emulation settings must be configured correctly. Once the configuration file (.NET) has been downloaded to the mobile computer, the new settings will take effect immediately and become the defaults. However, you still can change many of the settings directly on the mobile computer via CipherNet Runtime Menu or System Menu: CipherNet Runtime Menu — Press the Power key on the mobile computer. Emulation Type CipherNet Runtime Menu | 2.
MIRROR VT Emulator User Guide IN THIS CHAPTER 4.1 4.2 4.3 4.4 4.5 4.6 Emulation Type ......................................................... Font Size .................................................................. Case Conversion ........................................................ Screen Scroll & Control ............................................... Func Toggle & Function Key Mapping ............................ Reset .......................................................................
Chapter 4 Emulation Settings 4.4 SCREEN SCROLL & CONTROL Limited to the actual screen size, the mobile computer can only display a portion of the host screen. The following features help ease working from the terminal screen. 4.4.1 NAVIGATOR A navigator can be a graphic icon or miniature window on the terminal screen, indicating the relationship between the terminal screen and the host screen. A miniature cursor is blinking to indicate the input position. Option Remark None Disable the navigator.
MIRROR VT Emulator User Guide 4.4.4 VERTICAL STEPS Specify how many vertical steps the cursor will move at a time on the host screen when you press the following key combinations simultaneously – FN + Up FN + Down Note: The horizontal and vertical steps are associated with the font size. 4.4.5 CURSOR TRACKING This feature is enabled by default. The terminal screen will automatically adjust itself so that the cursor will always be visible on the screen.
Chapter 4 Emulation Settings Horizontal / Vertical Steps Press the following key combinations simultaneously – FN + Left (for 8300/8400/8500 Series) or FN + “-+$” (for 8000 Series) FN + Right (for 8300/8400/8500 Series) or FN + “%#•” (for 8000 Series) FN + Up FN + Down When the Cursor Tracking feature is enabled, there will be a warning beep to indicate that the terminal screen has reached the boundaries of the host screen.
MIRROR VT Emulator User Guide 4.5 FUNC TOGGLE & FUNCTION KEY MAPPING The function key or key combination is one of the keys on the mobile physical keypad that transmit control codes. Control codes do not produce displayable characters but are codes for functions. If these codes are received by the mobile computer, it will perform the associated function as defined. 4.5.
Chapter 4 Emulation Settings 4.5.2 KEYPAD TYPE The following options for keypad layout are supported for 8300/8400/8500 Series. Select the matching keypad type first, and map the available function keys to meet your needs. Mobile Computer Keypad Type Remark 8300 Series 8400 Series 44-TE Key is a new option specifically provided for terminal emulation use! 8500 Series 4.5.
MIRROR VT Emulator User Guide 40
Chapter 5 SCREEN REFORMATTING The screen reformat feature requires you to enable it by entering the activation key on the mobile computer; otherwise, the screen settings cannot take effect. If you have received an activation key, proceed with the screen capture task. Note: CipherLab will issue a unique activation key under the pay-by-use policy. Please contact your local sales representative for licensing. IN THIS CHAPTER 5.1 Activate the Screen Reformat Feature........................... 41 5.
MIRROR VT Emulator User Guide 5.2 CAPTURE HOST SESSION SCREENS 5.2.1 LOGON TO HOST 1) Run the CipherNet program on your computer. 2) Click OK to accept the End-User License Agreement (EULA). 3) Connect to the host via Telnet Menu | Connect or click on the toolbar. 4) Enter the IP address of the host that you wish to access via telnet. Select the check box of Save Log in case you need to analyze the activities during a telnet session.
Chapter 5 Screen Reformatting 5.2.2 CAPTURE HOST SCREENS You may capture screens from the host application using the associated commands via Telnet Menu or the following icons on the toolbar. A status message will appear on the left bottom of the CipherNet window, indicating the current status. 1) Click to start the capture task and save the host screens to a .SCR file. (Status message: Ready to capture) 2) Click to capture the current host screen. Skip unnecessary screens.
MIRROR VT Emulator User Guide 5.3 REFORMAT HOST SCREENS The target is to reformat the captured host screens, or pages, so that they can be best displayed on the terminal screen. The Screen settings page is divided into two parts: one is a window (left) displaying the captured host screens for viewing and editing, and the other is the associated forms (right) for reformatting these pages to fit in the terminal screen. 5.3.1 HOST SCREEN Load Host Session Screens Click to import the screens from a .
Chapter 5 Screen Reformatting Delete Current Screen Click if the screen currently displayed is not desired for reformatting. The current number of page, or screen, is displayed next to the button. Note: If you neither delete nor reformat a captured screen, there will be an empty screen displayed during a telnet session. 5.3.2 TERMINAL SCREEN Reformat Page … to Specify the page format on the terminal screen. You can have different page format for different host screen.
MIRROR VT Emulator User Guide Terminal Screen (Messages) Copy the necessary messages from the Host Screen window and rephrase them, if necessary, to fit to the terminal screen. Line No. This indicates the line number when the message is displayed on the terminal screen. Control Buttons If the total lines of page format setting exceed 8, the two buttons will become available for moving forward or backward to display the rest lines. Reset Click Reset to load the default settings.
Chapter 5 Screen Reformatting You have loaded a total of 4 host screens, and currently work on the first page. From the Host Screen window (left), you can see there are five message lines and four empty lines on this page. You may ignore the empty lines and simply skip them when reformatting. Copy the necessary messages for reformatting (right). You may need to rephrase them so that they can best fit in to a terminal screen, which is decided by the page format of the terminal screen.
MIRROR VT Emulator User Guide 2 Cipherlab Demo 3 Terminal Emulation 2 1.Video Shop AP (empty) 3 2.Book Store AP 4 1. Video Shop Application 4 3.Quit 5 2. Book Store Application 5 Select:_ 6 3. Quit this demo program 6 7 (empty) 7 8 (empty) 8 9 Please select your task : 9 (before reformatting) (after reformatting) Proceed to next host screen by clicking at the bottom of Host Screen window.
Chapter 5 Screen Reformatting Now proceed to the second page. From the Host Screen window (left), you can see there are six message lines and four empty lines on this page. You may ignore the empty lines and simply skip them for reformatting. Copy the necessary messages for reformatting (right). You may need to rephrase them so that they can best fit in to a terminal screen, which is decided by the page format of the terminal screen.
MIRROR VT Emulator User Guide 50
Chapter 6 GPRS SETTINGS The GPRS connectivity is only supported for 8500 Series. Access Point Name — name of access point that connects the mobile network to the Internet IP address (DHCP or static) User name and password (may be optional, depending on Challenge-Handshake Authentication Protocol) Once the configuration file (.NET) has been downloaded to the mobile computer, the new settings will take effect immediately and become the defaults.
MIRROR VT Emulator User Guide CipherNet Runtime Menu — Press the Power key on the mobile computer. GPRS Settings CipherNet Runtime Menu | 2. Utilities | 1. TCP/IP Settings System Menu — Press 7, 9 and the Power key simultaneously on the mobile computer. Access Point Name System Menu | 8. Next Page | 3. GSM/GPRS Menu | 3. GPRS Settings Enter PIN Code System Menu | 8. Next Page | 3. GSM/GPRS Menu | 2. Security CHAP Authentication System Menu | 8. Next Page | 3. GSM/GPRS Menu | 3.
Chapter 6 GPRS Settings Item Remark Access Point Name Required PIN Code Required if not using default CHAP User Name & Password Depends on CHAP authentication setting IP Address, dynamic or static Required; provide a static IP if DHCP is disabled 53
MIRROR VT Emulator User Guide 54
Appendix I SCAN ENGINE SETTINGS The MIRROR Terminal Emulator allows configuring the following reader types, depending on the module equipped on your mobile computer: 8000 8300 8400 8500 Barcode Reader 1D CCD Scan Engine 1D Laser Scan Engine 1D Long Range Laser Scan Engine (LR) 1D Extra Long Range Laser Scan Engine (ELR) 2D Scan Engine RFID Reader ACG_RFID Module v0.9 ACG_RFID Module v1.0 Options of different reader combination are allowed, such as 1D+RFID and 2D+RFID.
MIRROR VT Emulator User Guide Plessey Postal Codes Telepen Code 128 Code 128 GS1-128 (EAN-128) ISBT 128 Code 2 of 5 Industrial 25 (Discrete 25) Interleaved 25 Matrix 25 8400Note Chinese 25 8400Note Coop 25Note Note: (1) Matrix 25 and Chinese 25 are supported on 2D scan engine for 8400 only. (2) Coop 25 is supported on CCD/Laser scan engine for 8000/8300/8400 only.
Appendix I Scan Engine Settings RFID TAGS SUPPORTED The RFID reader supports read/write operations depending on the tags. The supported labels include ISO 15693, Icode®, ISO 14443A, and ISO 14443B. Currently, the performance of some tags has been confirmed, and the results are listed below for your reference. The results found with RFID module version 1.0 are different from those found with version 0.9 or older versions. Note: You should study the specifications of RFID tags before use.
MIRROR VT Emulator User Guide SRF55V10P TI Tag-it HF-I ST LRI64 ST LRI512 Tagit® Tagit ICODE® (Phillips) ICODE 58
Appendix II CCD/LASER SCAN ENGINE The tables below list reader settings as well as symbology settings for the CCD or Laser scan engine. READER SETTINGS TABLE CCD/Laser Engine Description Scan Mode Continuous Mode Laser mode Non-stop scanning Test Mode None The scanning won't stop until (a) a barcode is read or (b) the preset timeout expires. Press the scan trigger to start with scanning.
MIRROR VT Emulator User Guide One time, Two times, The higher the reading security is (that is, the more redundancy the user or Three times selects), the slower the reading speed gets. If "Three Times" is selected, it will take a total of four consecutive successful decodings of the same barcode to make the reading valid. Time-out 3 sec. 0~255 (second) Set the maximum time for decoding to continue during a scan attempt.
Appendix II CCD/Laser Scan Engine Transmit Check Digit Decide whether to include the check digit in the data being Yes transmitted. Select Length One or two fixed lengths 1~127 Range Interleaved 25 Enable Start/Stop Selection Refer to Industrial 25. Verify Check Digit Decide whether to verify the check digit. If the check digit No is incorrect, the barcode will not be accepted. Transmit Check Digit Decide whether to include the check digit in the data being Yes transmitted.
MIRROR VT Emulator User Guide Transmit Check Digit Decide whether to include the check digit in the data being Yes transmitted. Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and Disable special characters. Code 93 Enable MSI Disable Select one of the three calculation formulas to verify the Single Modulo check digit. If the check digit is incorrect, the barcode will 10 not be accepted.
Appendix II CCD/Laser Scan Engine Transmit Application ID Refer to RSS-14. Yes Transmit Check Digit Refer to RSS-14. Yes GS1 DataBar Expanded (RSS Expanded) Disable This group consists of (1) GS1 DataBar Expanded, and (2) GS1 DataBar Expanded Stacked. Transmit Code ID Refer to RSS-14. EAN-8 Yes Enable Convert to EAN-13 The EAN-8 barcode will be expanded into EAN-13, and the No next processing will follow the settings configured for EAN-13.
MIRROR VT Emulator User Guide Enable UPC-E1 Triple Decide whether to apply read redundancy to the UPC-E1 No Check barcode. Addon 2 / Addon 5 When applied, the same UPC-E1 barcode has to be read three times to make a valid reading. This is helpful when the barcode is defaced and requires more attempts to read it successfully. Decide whether to decode UPC-E with addons.
Appendix III LR/ELR LASER SCAN ENGINE The tables below list reader settings as well as symbology settings for the Long Range Laser (LR) or Extra Long Range Laser (ELR) scan engine. READER SETTINGS TABLE LR/ELR Engine Description Scan Mode Continuous Mode Laser mode Non-stop scanning Test Mode The scanning won't stop until (a) a barcode is decoded, (b) the pre-set timeout expires, or (c) you release the trigger. Hold down the scan trigger to start with scanning.
MIRROR VT Emulator User Guide SYMBOLOGY SETTINGS TABLE LR/ELR Engine Description Default Codabar Transmit Character Disable Start/Stop Decide whether to include the start/stop characters in the No data being transmitted. Select Length Any Length Any Length One or two fixed lengths Range (1~55) Code 128 Enable GS1-128 Enable Replace Separator Field Decide whether to replace the field separator.
Appendix III LR/ELR Laser Scan Engine Transmit Check Digit Decide whether to include the check digit in the data being No transmitted. "Verify Check Digit" must be enabled so that the check digit can be left out (= "Transmit Check Digit" disabled). Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and Disable special characters. Trioptic Code 39 Decide whether to decode Trioptic Code 39.
MIRROR VT Emulator User Guide Convert UPC/EAN RSS to "Convert to UPC/EAN" only applies to GS1 Databar-14 and No GS1 Databar Limited barcodes not decoded as part of a Composite barcode. Convert to EAN-13 Strip the leading "010" from barcodes. "01" is the Application ID and must be followed by a single zero (the first digit encoded) Convert to UPC-A Strip the leading "0100" from barcodes.
Appendix III LR/ELR Laser Scan Engine Convert to UPC-A The UPC-E1 barcode will be expanded into UPC-A, and the No next processing will follow the settings configured for UPC-A. UCC Coupon Extended Code Disable Read UPC-A barcodes starting with digit "5", EAN-13 barcodes starting with digits "99", and UPC-A/EAN-128 Coupon Codes. UPC-A, EAN-13, and EAN-128 must be enabled first! UPC/EAN Addon Addon 2 / Addon 5 --Decide whether to decode UPC-E1, UPC-A with addons.
MIRROR VT Emulator User Guide CODE ID TABLE Code ID Options Set 1 Set 2 Set 3 Set 4 Set 5 Codabar F N X N F Industrial 25 C H H H S Interleaved 25 D I Z I S Code 39 A C Y M A Trioptic Code 39 A C Y M X Code 93 I L L L G Code 128 H K K K C Italian Pharmacode A C Y M A MSI V V D P M EAN-8 P B B FF E EAN-13 M A A F E UPC-A J A A A E UPC-E S E C E E 70
Appendix IV 2D SCAN ENGINE The tables below list reader settings as well as symbology settings for the 2D scan engine. READER SETTINGS TABLE 2D Engine Description Scan Mode Continuous Mode Laser mode Non-stop scanning Test Mode Far Focus Far Focus – optimized to read at its far position Near Focus – optimized to read at its near position Smart Focus – toggles the focus position after every frame Decide whether to flash illumination on every barcode On capture to aid decoding.
MIRROR VT Emulator User Guide Time-out 0~255 (second) 3 sec. Set the maximum time for decoding to continue during a scan attempt. It applies to the following scan modes only – Aiming mode Laser mode Auto Off mode Aiming Duration 3 sec. 1~255 (second) Set the maximum time for aiming to continue before a scan attempt. Picklist Mode Picklist mode enables the decoder to decode only barcodes Disable aligned under the center of the laser aiming pattern.
Appendix IV 2D Scan Engine SYMBOLOGY SETTINGS TABLE 1D SYMBOLOGIES 2D Engine Description Default Codabar Transmit Character Disable Start/Stop Decide whether to include the start/stop characters in the No data being transmitted. Select Length Any Length Any Length One or two fixed lengths Range (1~55) Code 128 Enable GS1-128 Enable Replace Separator Field Decide whether to replace the field separator.
MIRROR VT Emulator User Guide Matrix 25 Disable Verify Check Digit Decide whether to verify the check digit. If the check digit No is incorrect, the barcode will not be accepted. Transmit Check Digit Decide whether to include the check digit in the data being No transmitted. Select Length Any Length Any Length One or two fixed lengths Range (1~55) Chinese 25 Disable Note: Matrix 25 and Chinese 25 are supported on 2D scan engine for 8400 only.
Appendix IV Check Digit Algorithm One Check Digit Single Modulo 10 Two Check Digits 2D Scan Engine Mod 10/Mod 11 Mod 10/Mod 10 Transmit Check Digit Decide whether to include the check digit in the data being No transmitted. Select Length Any Length One or two fixed lengths Range (1~55) GS1 DataBar (RSS) GS1 Databar-14 Any Length --GS1 DataBar-14 is short for GS1 DataBar Omnidirectional.
MIRROR VT Emulator User Guide Transmit Preamble Decide whether to include the UPC-A preamble System System Number (and Country Code) in the data being transmitted. Number Addon 2 / Addon 5 Refer to UPC/EAN Addon setting. UPC-E0 Enable Transmit Check Digit Decide whether to include the UPC-E0 check digit in the Yes data being transmitted. Transmit Preamble Decide whether to include the UPC-E0 preamble System System Number (and Country Code) in the data being transmitted.
Appendix IV 2D Scan Engine Postal Codes --- US Postnet Enable US Planet Enable Transmit US Check Digit Postal US Postnet or US Planet must be enabled first! UK Postal Transmit UK Check Digit Enable Enable Postal UK Postal must be enabled first! Enable Japan Postal Enable Australian Postal Enable Dutch Postal Enable UPU FICS Postal Disable USPS 4CB/One Code/ Disable Intelligent Mail Note: UPU FICS Postal and USPS 4CB/One Code/ Intelligent Mail are supported on 2D scan engine for 8400
MIRROR VT Emulator User Guide 2D SYMBOLOGIES 2D Engine Description Default 2D Symbologies --- PDF417 Enable MicroPDF417 Enable Data Matrix Enable Data Matrix Inverse Decide whether to decode Data Matrix Inverse. Regular Only Regular Only Decode regular Data Matrix barcodes only. Inverse Only Decode inverse Data Matrix barcodes only. Inverse Autodetect Decode both regular and inverse Data Matrix barcodes.
Appendix IV 2D Scan Engine MicroQR Enable Aztec Enable Aztec Inverse Decide whether to decode Aztec Inverse. Regular Only Regular Only Decode regular Aztec barcodes only. Inverse Only Decode inverse Aztec barcodes only. Inverse Autodetect Decode both regular and inverse Aztec barcodes. Note: Data Matrix Mirror, MicroQR, Aztec, and 2D Inverse are supported on 2D scan engine for 8400 only.
MIRROR VT Emulator User Guide Note: When printing barcodes, keep each Macro PDF sequence separate, as each has a unique identifier. Do not mix barcodes from several Macro PDF sequences, even if they encode the same data.
Appendix IV 2D Scan Engine CODE ID TABLE 8500 Code ID Options Set 1 Set 2 Set 3 Set 4 Set 5 Codabar F N X N F Industrial 25 C H H H S Interleaved 25 D I Z I S Code 39 A C Y M A Trioptic Code 39 A C Y M X Code 93 I L L L G Code 128 H K K K C Italian Pharmacode A C Y M A MSI V V D P M EAN-8 P B B FF E EAN-13 M A A F E UPC-A J A A A E UPC-E S E C E E Code 11 K J J D H Composite Code (CC-A/B, CC-C) L X M J La Compo
MIRROR VT Emulator User Guide 8400 Code ID Options Set 1 Set 2 Set 3 Set 4 Set 5 Codabar F N X N F Industrial 25 C H H H S Interleaved 25 D I Z I S Matrix 25 E G G G S Chinese 25 Q M P S X Code 39 A C Y M A Trioptic Code 39 A C Y M X Code 93 I L L L G Code 128 H K K K C ISBT 128 H K K K C Italian Pharmacode A C Y M A MSI V V D P M EAN-8 P B B FF E EAN-13 M A A F E UPC-A J A A A E UPC-E S E C E E Code 11 K
Appendix IV 2D Scan Engine Aztec g U Q Z z IATA z z r h S Macro PDF417 p i a q L Macro MicroPDF417 q j b r L 83
