User guide

18
MIRROR VT Emulator User Guide
2.1 BARCODE READER
2.1.1 SELECT READER TYPE
Select a reader type that matches the hardware configuration of your mobile computer.
The associated barcode reader settings, as well as the barcode parameters (= symbology
settings) will be displayed accordingly.
For more information, refer to the following appendixes:
 Appendix I – Scan Engine Settings for information on the symbologies and RFID tags
supported.
 Appendix II – CCD/Laser Scan Engine provides information on the reader settings as
well as symbology settings for the CCD or Laser scan engine.
 Appendix III – LR/ELR Laser Scan Engine provides information on the reader settings
as well as symbology settings for the Long Range Laser or Extra Long Range Laser
scan engine.
 Appendix IV – 2D Scan Engine provides information on the reader settings as well as
symbology settings for the 2D scan engine.
Note: If you accidentally selected the wrong reader type and downloaded the settings to
the mobile computer, the mobile computer will use the defaults for the correct
reader type instead.
2.1.2 CONFIGURE READER SETTINGS
Depending on the barcode reader selected, configure the associated reader settings.
Refer to the Reader Settings Table in Appendixes II ~ IV.
2.1.3 CONFIGURE SYMBOLOGY SETTINGS
Depending on the barcode reader selected, configure the associated symbologies. Refer
to the Symbology Settings Table in Appendixes II ~ IV. For a symbology along with the
button
, it means advanced symbology settings are available.
2.1.4 CODE ID
Depending on the barcode reader selected, configure Code ID settings. Refer to the Code
ID Table in Appendixes II ~ IV.