User guide

25
Chapter 2 Barcode Settings
Beep Sequence
A beep sequence refers to pairs of Beep Frequency(x) and Beep Duration(y). You may specify
whether or not to have a beep when decoding of a barcode is done successfully.
 You may specify pairs of “x y” other than the default “0E 05”. Click the editing box and select
from the Grid Control.
Vibrator
Specify how long the vibrator is turned on (in units of 0.1 second) to indicate a barcode has been
read successfully.
 By default, the vibrator is turned off.
LED Flashing
You may specify whether or not to have green LED indication when decoding of a barcode is done
successfully.
 By default, the LED indication is disabled.
2.3.5 ERROR FEEDBACK
When an error occurs, the mobile computer may inform you by issuing a beep, vibrating,
or flashing LED light.
Command
Specify the escape sequence to signal an error. Click the editing box and select from the Grid
Control.
Beep Sequence
A beep sequence refers to pairs of Beep Frequency(x) and Beep Duration(y). You may specify
whether or not to have a warning beep to notify that an error occurs while reading a barcode.
 You may specify pairs of “x y” other than the default “1E 07 00 05 1E 07”. Click the editing box
and select from the Grid Control.
Vibrator
Specify how long the vibrator is turned on (in units of 0.1 second) to notify that an error occurs
while reading a barcode.
 By default, the vibrator is turned off.
LED Flashing
You may specify whether or not to have red LED indication to notify that an error occurs while
reading a barcode.
 By default, the LED indication is disabled.