User guide

MIRROR VT Emulator User Guide

4.4.4 VERTICAL STEPS

Specify how many vertical steps the cursor will move at a time on the host screen when

you press the following key combinations simultaneously –

 FN + Up

 FN + Down

Note: The horizontal and vertical steps are associated with the font size.

4.4.5 CURSOR TRACKING

This feature is enabled by default. The terminal screen will automatically adjust itself so

that the cursor will always be visible on the screen. Thus, every screen received from the

host will be displayed with the cursor visible to indicate the first input field.

Note: This feature only works when a screen refresh incident occurs on the host.

When you disable the Cursor Tracking feature, the coordinates (0,0) on the terminal

screen are related to (0,0) on the host screen. Thus, every screen received from the host

will be first displayed starting from (0,0) regardless of the cursor.

The relationship between the terminal screen (small) and the host screen (large) is based

on the upper-left point of the screens (see above). The cursor is outside of the terminal

screen. To view the hidden information or locate the cursor, you need to adjust the

terminal screen manually.