User guide

37
Chapter 4 Emulation Settings
Horizontal / Vertical Steps
Press the following key combinations simultaneously –
 FN + Left (for 8300/8400/8500 Series) or FN + “-+$” (for 8000 Series)
 FN + Right (for 8300/8400/8500 Series) or FN + “%#•” (for 8000 Series)
 FN + Up
 FN + Down
When the Cursor Tracking feature is enabled, there will be a warning beep to indicate that the
terminal screen has reached the boundaries of the host screen.
Note: For 8500 Series, the above function keys are originally used to adjust LCD
contrast (FN + Up/Down) and backlight intensity (FN + Left/Right). After
logging on to a host, these keys will be used to adjust the terminal screen instead.
That is, you cannot use them to adjust LCD contrast and backlight intensity until
you log out.
Cursor Movement
 To move the cursor to a desired input field, press the function key that is mapped to “Tab”.
 To move the cursor to a desired input point, press the arrow keys Up, Down, Left, and Right.
4.4.6 TRIM SPACES
Select the check box to make the most use of the terminal screen; unnecessary spaces
will be discarded. Take the following for example.
Original line:
-> 1. Set up<-
Trimmed
->1. Set up<-
Note: Spaces between characters will not be discarded.
4.4.7 DISABLE LOCAL ECHO
By default, it will echo typed text locally on the mobile computer.
 Select the check box if local echo is not desired.
4.4.8 CURSOR FLASHING
Select the check box to have a flashing cursor.
4.4.9 LINE BUFFER
Select the check box to operate in line buffer mode.