User guide

47
Chapter 5 Screen Reformattin
g
 You have loaded a total of 4 host screens, and currently work on the first page.
 From the Host Screen window (left), you can see there are five message lines and
four empty lines on this page. You may ignore the empty lines and simply skip them
when reformatting.
 Copy the necessary messages for reformatting (right). You may need to rephrase
them so that they can best fit in to a terminal screen, which is decided by the page
format of the terminal screen.
Note: Host Row/Column can be ignored if the message is not requesting you to input
information.
 From the Host Screen window (left), click on the input point right following the last
message “Please select your task :”. Its coordinates are (9,26).
Copy this message for reformatting (right). You may need to rephrase it as well. For
example, enter “Select:_”. The underline character “_” is used to indicate the
maximum length for input.
Note: Host Row/Column and the maximum length for input must be specified correctly;
otherwise, the host applications will not work properly.
 Below shows the messages displayed on the host screen before reformatting, and
those rephrased to be displayed on the terminal screen after reformatting.
Rows
Host Screen Lines Terminal Screen
1 (empty) 1 TE Demo