User guide

55
The MIRROR Terminal Emulator allows configuring the following reader types,
depending on the module equipped on your mobile computer:
8000 8300 8400 8500
Barcode Reader
1D CCD Scan Engine
   
1D Laser Scan Engine
   
1D Long Range Laser Scan Engine (LR)

  
1D Extra Long Range Laser Scan Engine (ELR)
  

2D Scan Engine
 
 
RFID Reader
ACG_RFID Module v0.9
  

ACG_RFID Module v1.0

  
Options of different reader combination are allowed, such as 1D+RFID and 2D+RFID. For
each combination, both readers can be initialized and ready for scanning at the same
time (dual mode operation). For example, if you press the SCAN button while running
the CipherNet run-time program on the mobile computer, it will read a barcode in
position or an RFID tag in proximity depending on which one comes first.
Note: You cannot have 1D+2D scan engines installed on the mobile computer because
they are both barcode readers!
SYMBOLOGIES SUPPORTED
Varying by the scan engine installed, the supported symbologies or tag types are listed
below. For details on configuring associated settings, please refer to each Appendix
separately.
CCD, Laser LR, ELR 2D
Codabar
  
Code 11

8300
Note

Note: Code 11 is supported on Long Range Laser scan engine for 8300 only.
Code 93
  
Composite Code
  
MSI
  
Appendix I
SCAN ENGINE SETTINGS