User guide

62
MIRROR VT Emulator User Guide
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
Yes
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and
special characters.
Disable
Code 93 Enable
MSI Disable
Verify Check Digit Select one of the three calculation formulas to verify the
check digit. If the check digit
is incorrect, the barcode will
not be accepted.
 Single Modulo 10
 Double Modulo 10
 Modulo 11 & 10
Single Modulo
10
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
 Last digit not transmitted
 Both digits transmitted
 Both digits not transmitted
Both digits
transmitted
Select Length
 One or two fixed lengths
 Range
1~127
Negative Barcode Disable
Plessey Disable
Convert to UK Plessey When applied, each occurrence of the character "A" in the
barcode data will be replaced by the character "X".
No
Transmit Check Digit Decide whether to include the two check digits in the data
being transmitted.
Yes
Telepen Disable
Original Telepen
(Numeric)
The original Telepen includes numeric characters. No
AIM Telepen (Full
ASCII)
AIM Telepen (Full ASCII) includes all the alphanumeric and
special characters.
Yes
GS1 DataBar-14 (RSS-14) Disable
GS1 DataBar-14 is short for GS1 DataBar Omnidirectional. This group consists of (1) GS1 DataBar
Omnidirectional, (2) GS1 DataBar Truncated, (3) GS1 DataBar Stacked, and (4) GS1 DataBar
Stacked Omnidirectional.
Transmit Code ID Decide whether to include Code ID ("]e0") will be included
in the data being transmitted.
Yes
Transmit Application
ID
Decide whether to include the Application ID ("01") in the
data being transmitted.
Yes
Transmit Check Digit Decide whether to include the check digit in the data being
transmitted.
Yes
GS1 DataBar Limited (RSS Limited) Disable
Transmit Code ID Refer to RSS-14. Yes