User's Manual

121
Update
Chapter 6 ! Ζ
 If "Keyboard Wedge" is configured for interface, Key Type and Key Status will then
become applicable. You may decide whether or not to apply Key Status when “Normal
Key” is selected for Key Type.
Key Type
Key Status
Scan Code Up to 2 scan code values are allowed –
each requires two hexadecimal values.
N/A
Normal Key Up to 4 character strings are allowed –
each requires two hexadecimal values.
 Default setting
 Add Shift
 Add Left Ctrl
 Add Left Alt
 Add Right Ctrl
 Add Right Alt
 Add Break
For example, read labels for [Add Shift],
[A], [Add Shift], and [B].
6.2.6 FIELD TRANSMISSION SEQUENCE
After configuring the data fields and additional fields, you must now program the
transmission sequence of these fields that comprise the final data. This field transmission
sequence can be assigned in any desired order and fields can be assigned multiple times
as well.
Note: Up to twelve fields can be assigned.
1) Read the “Start” label to begin with programming the field transmission sequence.
Additional Field 4 …
Additional Field 5 …
Start (Programmin
g) …
Additional Field 3 …