User's Manual

7
!
NUMERIC PARAMETERS
Steps Action User Feedback if Successful
1 Power on the scanner... The scanner will respond with a long beep
(high tone).
2 Enter the Configuration Mode…
The scanner will respond with six beeps
(high-low tone repeats three times), and
its LED indicator will become flashing red.
Read a Setup label...
For example,
The scanner will respond with two beeps
(low-high tone) if reading a normal label.
3
The scanner will respond with one short
beep if reading a special label such as
“Max. Length”, indicating the setup
requires reading more labels.
The scanner will respond with two beeps
(low-high tone) when the input values are
validated.
4 Exit the Configuration Mode…
OR
Same as for Enter the Configuration Mode.
Normal label
Normal label
Special label
Decimal label
or labels