User's Manual

32
Enter Setup
1600 Series Barcode Scanner User Guide
2.1.1 ACTIVATE BLUETOOTH HID & SELECT KEYBOARD TYPE
By default, Bluetooth HID is activated on the 1660 scanner, and the keyboard type is set
to PCAT (US). When Bluetooth HID is re-activated, you will have to select a keyboard
type to complete this setting.
1) Read the label above to activate Bluetooth HID and select a keyboard type.
2) Read the “Decimal Value
” label on page 123. Refer to the table below for the number
of desired keyboard type.
3) Read the “Validate” label on the same page to complete this setting.
KEYBOARD TYPE
By default, the keyboard type is set to PCAT (US). The following keyboard types are
supported –
No.
Keyboard Type No. Keyboard Type
64 PCAT (US) 70 PCAT (UK)
65 PCAT (French) 71 PCAT (Belgium)
66 PCAT (German) 72 PCAT (Spanish)
67 PCAT (Italy) 73 PCAT (Portuguese)
68 PCAT (Swedish) 74 PS55 A01-2 (Japanese)
69 PCAT (Norwegian) 75 User-defined table
2.1.2 RESET CONNECTION
For Bluetooth HID, you can only have one scanner connected to your computer. If you
want to connect the scanner to another computer, you must have it read the “Reset
Connection” label first. The scanner will restart itself automatically. Then, go through the
whole process to establish a new connection.
Activate Bluetooth HID & Select Keyboard Type …
Reset Connection