User's Manual

104
1800 Series Handheld RFID Reader Reference Manual
[m] Get Reset Counter Command ‘1’ ‘0’
[n] UHF Power On ‘1’ ‘0’
[o] New Bluetooth
®
connection ‘1’ ‘0’
ERR,[code]\r
#@dat_rstcnt=[m],[n.],[o]\r
Purpose Set Counter Reset Event
Response OK\r
ERR,[code]\r
#@dat_rstcnt\r
Purpose Reset Data Counter
Response OK\r
ERR,[code]\r
Note: Data Counter will always be reset when system power up.
Example:
Counter Padding
You can define the padded character as a prefixed counter. Characters to be padded before
data counter, shown in Hexadecimal value. Refer to ASCII Table
. The default value is 0x20