User's Manual

106
1800 Series Handheld RFID Reader Reference Manual
4.3.3 DATA SECTION
Data section is divided into 5 fields as CRC, PC, EPC, Memory Data and Data Length.
Separators can be defined among fields to make more clear presentation. It is up to 4
separators can be specified to Data section.
Data Sequence
By default, data sequence is PC, EPC, CRC, Memory Data and Data Length. Just because the
Data Length parameter is set to ‘0’, it will not be appeared during data output.
Command:
#@dat_rfseq?\r
Purpose Get the Sequence Setting of RFID Data Section
Response OK,[m],[n],[o],[p],[q]\r (Default m= ‘2’, n= ‘3’, o= ‘1’, p= ‘4’, q= ‘0’)
[m]: RFID Data in Field 1
[n]: RFID Data in Field 2
[o]: RFID Data in Field 3
[p]: RFID Data in Field 4
[q]: RFID Data in Field 5
[m]~[q] Description
‘0’
Disable this Field
‘1’
CRC
‘2’
PC
‘3’
EPC
‘4’
Memory Data
This field only appears when RFID function is set to
“Read Tag Memory”
‘5’
Data Length
ERR,[code]\r
#@dat_rfseq=[m],[n],[o],[p],[q]\r