User's Manual

152
1800 Series Handheld RFID Reader Reference Manual
 For the communication settings, select
“RS-232/IrDA” and the correct COM port for
Bluetooth
®
SPP interface.
 Ignore the baud rate setting.
 For the file option, click [Browse] to select the
target file e.g. U1860V*.SHX for firmware
update.
 Click [OK].
5) After upgrading, RFID Reader will restart automatically.
USE <F2>+<TRIGGER>
1) Power Off RFID Reader.
2) Press and hold the <F2>+<Trigger> for 3 seconds to enter download mode.
3) Use USB cable to connect RFID Reader and host computer.
4) Run the download utility “ProgLoad.exe” on host computer to upgrade the firmware.
Note: <F2>+<Trigger> firmware upgrade only supports CDC driver. Refer to 2.1 USB
Interface to configure USB type.
HOW TO UPGRADE 3610 FIRMWARE
Connect 3610 to the USB port of host computer after installing its driver.
UPGRADE 3610 CPU FIRMWARE
1) After making a connection between 3610 and RFID Reader. Power off RFID Reader.
2) Press <F2>+<Trigger> for 3 seconds to enter Firmware Upgrade Mode with LED1
flashing red, continual beeping.
3) Run the download utility “ProgLoad.exe” on the host computer.