User's Manual

Chapter 2

Communication Interface

2.6 USB HID VIA 3610

For USB HID via 3610, connect 3610 to the USB port of host computer, and then connect

RFID Reader to 3610 via Bluetooth

. Configure the interface to USB HID via 3610 by issuing

the “#@bt_type=” command to parameter ‘6’.

To capture the data run any text editor on host computer. The scanned data will be

transmitted to the host computer.

Note: As above for a read only interface, you can not issue “#@BT_TYPE=” command to

change the Bluetooth

interface to 3610 directly by command.

How to connect with the 3610?

There are two parameters for “#@bt_target” command to 3610. One is Bluetooth

target – 3610 and

another is the serial No. of 3610.

Command:

#@bt_target?\r

Purpose Get Bluetooth

Target Machine

Response OK,[m],[n]\r

[m]: Bluetooth

Type, ‘0’ – SPP Master, ‘1’ – 3610

[n]: MACID of target Machine or S/N of 3610

ERR,[code]\r

#@bt_target=[m],[N]\r

Purpose Set Bluetooth

Target Machine

Response OK\r

ERR,[code]\r

Example:

HID Settings

Defaults

Keyboard Type PCAT (US)

Alphabets Layout Normal