User's Manual

99
Chapter 4 SCANNING UHF RFID Ta
g
4.3.1 EPC ENCODING SCHEME
This function will decide which kind of tags can be read.
Accepted EPC Encoding Scheme – Group 1
Command:
#@rf_epctype1?\r
Purpose Get EPC Scheme – Group1
Response OK,[m]\r (Default = ‘11111111’ )
[m]: EPC Scheme – Group1
8 character series composed of "0" and "1" to enable or disable the listed tag types.
‘0’ – disable the tag type.
‘1’ – enable the tag type.
Character Tag Type
1 (Left) GDTI96
2 GSRN96
3 DoD96S
4 SGTIN96
5 SSCC96
6 GLN96
7 GRAI96
8(Right) GIAI96
e.g. [m]=“10011000” means only to enable GDTI96, SGTIN96,SSCC96
ERR,[code]\r
#@rf_epctype1=[m]\r
Purpose Set EPC Scheme – Group1
Response OK\r
ERR,[code]\r
Accepted EPC Encoding Scheme – Group 2
Command:
#@rf_epctype2?\r
Purpose Get EPC Scheme – Group2
Response OK,[m]\r (Default = ‘11111111’ )
[m]: EPC Scheme – Group2
8 character series composed of "0" and "1" to enable or disable the listed tag types.