User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
19
This chapter explains the features and usage of RFID Reader. Before configuring RFID
Reader, we will detail the information received when “#@sys_info?” command is issued.
Command:
#@sys_info?\r
Purpose Get System Information
Response OK,[m]\r[n]\r[o]\r[p]\r[Q]\r
[m]: string that indicates model name
“1861E” – Basic UHF type Europe Band
“1861U” – Basic UHF type US Band
[n]: string that indicates serial number
[o]: string that indicates kernel version
[p]: string that indicates user version
[q]: string that indicates BTMACID
ERR,[code]\r
Example:
Command
#@sys_info?
Response (s)
OK,
MODEL: 1861E → model name
S/N: DZ25DV042 → serial number
KNL_VER: V1.00 → kernel version
STD_VER: V1:00 → user version
BT_MACID: 00:d0:17:a8:ff:d5 → Bluetooth
®
MAC address
Chapter 1
UNDERSTANDING RFID READER