User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
30
1800 Series Handheld RFID Reader Reference Manual
Example:
Command
#@sys_memsize? → get current memory size
Response (s)
OK, 4072
Command
#@sys_memen=1 → enter memory mode
Response (s)
OK
Command
#@sys_memdly=4 → set the delay time of data transmission to 2 sec.
Response (s)
OK
Command
#@sys_memup → upload memory data
Response (s)
1. 2012-04-18 30003430333130303132303030304221
2. 2012-04-18 30003430333130303132303030304221
3. 2012-04-18 30003430333130303132303030304221
OK
Command
#@sys_memclr → clear memory size
Response (s)
OK
] 2sec.→
] 2sec.→