User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
45
Chapter 1
Understandin
g
RFID Reader
#@sys_vibdu=[m]\r
Purpose Set Vibrator Duration
Response OK\r
ERR,[code]\r
1.7 RTC
RFID Reader supports a Real Time Clock to keep track of the current time.
Command:
#@sys_time?\r
Purpose Get System Clock
Response OK,[Y],[M],[D],[h],[m],[s]\r
[Y]: ‘00’ ~ ‘99’
[M]: ‘01’ ~ ‘12’
[D]: ‘01’ ~ ‘31’
[h]: ‘00’ ~ ‘23’
[m]: ‘00’ ~ ‘59’
[s]: ‘00’ ~ ‘59’
ERR,[code]\r
#@sys_time=[Y],[M],[D],[h],[m],[s]\r
Purpose Set System Clock
Response OK\r
ERR,[code]\r
Example:
Command
#@sys_time? → get current system time
Response (s)
OK,12,05,10,10,36,05 → date=2012/5/10, time=10:36 05
Command
#@sys_time=12,06,20,12,50,00 → set system date and time to 2012/6/20 12:50 00
Response (s)
OK