User's Manual

47
Follow the sections below for output interfaces supported to establish USB and WPAN
connection with RFID Reader. Refer to the table as below:
1800 Communication Interface:
Interface Configuration RFID Data Out Upload Memory Data
SPP Slave v v v
SPP Master v v v
HID v
3610 Virtual COM v v v
Bluetooth
®
3610 HID v
USB
Virtual COM
Windows CDC
Driver/SiliconLab Driver
v V (*) v
Note: ‘*’ means that RFID data can be output via USB Virtual COM only when users have
carried out the “#@dat_2usb=1” command. Please refer to 5.4 Output EPC Data via USB
Virtual COM
.
IN THIS CHAPTER
2.1 USB Interface .......................................................... 48
2.2 Bluetooth
®
Connection Type........................................ 49
2.3 Bluetooth
®
SPP Slave ................................................. 50
2.4 Bluetooth
®
SPP Master ............................................... 50
2.5 Bluetooth
®
HID ......................................................... 51
2.6 USB VCOM and HID via 3610....................................... 61
Note: By default, the output interface is set to “SPP Slave”.
Chapter 2
COMMUNICATION INTERFACE