User's Manual
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- QUICK START
- UNDERSTANDING RFID READER
- COMMUNICATION INTERFACE
- SETTING UP A WPAN CONNECTION
- SCANNING UHF RFID TAG
- DEFINING OUTPUT FORMAT
- ALTERNATE MODE
- SPECIFICATIONS
- FIRMWARE UPGRADE
- ASCII TABLE
- SCAN CODE
- STATUS CODE
52
1800 Series Handheld RFID Reader Reference Manual
2.5 BLUETOOTH
®
HID
For Bluetooth
®
HID connection, issue the “#@bt_type=” command with parameter ‘5’.
Refer to
1Using HyperTerminal for related connection settings. To capture the data, run
any text editor on host computer and the scanned data will be transmitted to the host
computer.
HID Settings
Defaults
Keyboard Type PCAT (US)
Alphabets Layout Normal
Numeric Layout Normal
Capital Lock Type Normal
Capital Lock State Off
Alphabets Transmission Case-sensitive
Numeric Transmission Alphanumeric keypad
Inter-Character Delay 0 (ms)
2.5.1 ACTIVATE BLUETOOTH
®
HID & SELECT KEYBOARD TYPE
When Bluetooth
®
HID interface is activated, you will have to select a keyboard type to
complete this setting. By default, Bluetooth
®
HID is activated with PCAT (US) type on the
RFID Reader.
Bluetooth
®
HID
The following keyboard types are supported —
No. Keyboard Type No.
Keyboard Type
64 PCAT (US) (Default) 71 PCAT (Belgium)
65 PCAT (French) 72 PCAT (Spanish)
66 PCAT (German) 73 PCAT (Portuguese)
67 PCAT (Italy) 74 PS55 A01-2 (Japanese)
68 PCAT (Swedish) 75 Reserved
69 PCAT (Norwegian) 76 PCAT (Turkish)
70 PCAT (UK) 77 PCAT (Hungarian)