User's Manual

4
Introduction
The 3560 Access Point is a unit that contains a Bluetooth radio module and acts as a bridge
between 8060/8360 and 10/100BASE-T Ethernet. Bluetooth is a short-range wireless
technology operating in the 2.4 GHz band. It enables devices to have the ability to form
networks and exchange information. 3560 followed the Bluetooth Network Encapsulation
Protocol (BNEP) to provide networking capability for 8060/8360 portable terminals. Each
3560 can allow up to 7 terminals to gain access to its services.
This document describes how to use 3560 to provide a networking service to 8060/8360.
Packing List
The 3560 Access Point package includes the following:
1. A 3560 Access Point
2. An AC Adaptor
Names of parts and their functions
No. Item Description
A LAN Status Indicator Flash, if LAN is working
B Terminal Connected Indicator Flash, if communicating with terminal
C Configuration Indicator ON, if enter configuration mode
D Reset Switch For entering default settings only
E LAN Cable Connecter LAN connector
F DC 5V Input Power input connector
No. Status Configuration Terminal Connected LAN Status
1 LAN Cable is OK --- --- Flash
2 Switch Detecting ON 3 sec. OFF OFF
3 Standby (No Terminal) ---- ON ----
4 Standby (Terminal connected) ---- Flash fast ----
5 Configuration On ON ---- Flash
6 User Mode Downloading Flash fast OFF Flash
7 Kernel Mode Flash slowly Flash slowly ----
8 Kernel Mode Downloading Flash fast Flash slowly Flash
9 Burn-in Mode(Internal Test) OFF Flash slowly ----
10 Burn-in Mode Host Connected ON Flash slowly Flash
11 Flash ROM Upgrading ON ON ----