User's Manual

5
Initial Configuration
1. Connect the 3560 to the LAN and turn on the power.
2. Run the Windows HyperTerminal program or any Telnet client application on the PC.
3. Open the TCP/IP(Winsock) connection with the 3560 IP and port 23
4. The default IP is 192.168.1.1. User could use the default IP by using the method
descript in next section.
5. After connecting to the 3560, the 3560 will be in configuration mode, the configuration
indicator will be turned on and the following messages will be shown on
HyperTerminal's window:
CipherLab 3560
MAC ID=00d017201111
Press [Enter] to Show Configuration Menu....
6. To configure the 3560, please press [Enter] and follow the dialog messages to
complete the procedure.
******************************
* CipherLab 3560 *
* Configuration Menu *
******************************
Kernel Version:3560K-1.00
Library Version:3560L-1.01
MAC ID=00d017201111
1)Configuration
2)Return to Default
3)Download Program
4)Download Kernel
5)Terminal List
How to Connect to The 3560 with Default IP
Sometimes, user forgets the IP of 3560, it is possible to use the default IP to setup or read
the 3560 setting again.
1. Connect the 3560 to the LAN (no power supply yet).
2. Hold down the reset button and connect the adapter's DC jack to the 3560.
3. Release the reset button after 3 seconds. The 3560 will be in default IP mode.
Normal Installation
1. Insert the AC adapter into the outlet and connect its DC jack to the 3560.
2. Connect the 3560 with the LAN cable.
3. Check the LAN Status Indicator on the 3560 to make sure that the LAN is working.
4. After 5 second, check the Terminal Connected Indicator on the 3560.to make sure that
the Bluetooth initialize is ok.
Testing
1. Make sure the 3560 is working and LAN is connected
2. Enter the system menu of 8060/8360 by pressing “7”+”9”+”POWER”.
3. Enter BNEP menu and choose [Inquiry] item to search any Bluetooth devices around
the 8060/8360