User Manual

162

Enter Setup

1660 Barcode Scanner

User Guide

#@TRIGON<CR>

Purpose Enable the software trigger

Remarks

“0x23” + “0x40” + “0x54” + “0x52” + “0x49” + “0x47” + “0x4f” + “0x4e” + “0x0d”

EXAMPLE

Send the serial commands via BT SPP or USB Virtual COM. For example, run

HyperTerminal on the host computer.

 For the scanner to stop immediately –

 For the scanner to resume to work –

 For the scanner to change the beeper to medium volume and beep –

#@101011<CR>

#@////<CR>

 For the scanner to change the beeper to minimal volume and beep –

#@101010<CR>

#@////<CR>

 For the scanner to change the beeper frequency to 8 kHz (for Good Read Beep only)

and beep –

#@101001<CR>

#@////<CR>

 For the scanner to change the beeper length to longest (for Good Read Beep only)

and beep –

#@101008<CR>

#@////<CR>