User Manual

FOR HAND-HELD PRODUCT WITH RF FUNCTIONS
This 3610 (FCC ID: Q3N-3610) complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65. The 1660 has very low levels of RF energy that it is deemed to comply
without testing of specific absorption ratio (SAR).
The 1660 (FCC ID: Q3N-1660) complies with FCC radiation exposure limits set forth for an uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65.
The 1660 has very low levels of RF energy that it is deemed to comply without testing of specific
absorption ratio (SAR).
l.
FOR PRODUCT WITH LASER
Per FDA and IEC standards, the scan engines described in this manual are not given a laser
classification. However, the following precautions should be observed:
CAUTION
This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not stare
into beam.
SAFETY PRECAUTIONS
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF
USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
 The use of any batteries or charging devices, which are not originally sold or manufactured by
CipherLab, will void your warranty and may cause damage to human body or the product itself.
 DO NOT disassemble, incinerate or short circuit the battery.
 DO NOT expose the scanner or the battery to any flammable sources.
 For green-environment issue, it's important that batteries should be recycled in a proper way.
 Under no circumstances, internal components are self-serviceable.
 The charging and communication cradle uses an AC power adaptor. A socket outlet shall be
installed near the equipment and shall be easily accessible. Make sure there is stable power
supply for the mobile computer or its peripherals to operate properly.
CARE & MAINTENANCE
 Use a clean cloth to wipe dust off the scanning window and the body of the scanner as well as
the cradle. DO NOT use/mix any bleach or cleaner.
 If you want to put away the scanner for a period of time, download the collected data to a host
computer when in the memory mode, and then take out the battery. Store the scanner and
battery separately.
 When the scanner resumes its work, make sure the battery is fully charged before use.
 If you shall find the scanner malfunctioning, write down the specific scenario and consult your
local sales representative.