Product Info

25
Update
Chapter 1
Auto Off after
0~254 min. (*10)
1) Read the barcode above to specify the time interval in minutes before the scanner
automatically turns off.
2) Read the “Decimal Value” barcode on page
錯誤
!
尚未定義書籤。
. For example, read “1”
and “5” for the scanner to automatically turn off after being idle for 15 minutes.
3) Read the “Validate” barcode on the same page to complete this setting.
Note: Auto Power Off will not take effect when the scanner is in the configuration mode.
Power-
Saving after
0~254 min. (*2)
1) Read the barcode above to specify the time interval in minutes before the scanner
enters low-speed mode.
2) Read the “Decimal Value” barcode on page
錯誤
!
尚未定義書籤。
. For example, read “5”
for the scanner to enter low-speed mode after being idle for 5 minutes.
3) Read the “Validate” barcode on the same page to complete this setting.
Note: Power-Saving will not take effect
when one of the following conditions is met:
(1) The scanner is in the configuration mode.
(2) The Power-Saving value is set to 0.
(3) The scan mode is set to Continuous or Alternate Mode.
(4) The setting value of Power-Saving is greater than that of Auto Power Off.