User Manual

127
Update
You may configure in which format the collected data will be output to the host computer.
Barcode read by the scanner will be processed in the following sequence –
1) Perform character substitution on the data scanned.
2) Add Code ID
and Length Code to the front of the data:[Code ID][Length Code][Data]
3) Process the whole data in step 2 with user formats. Data is now divided into fields by
user specified rules. Refer to Chapter 6 Applying Formats for Data Editing
.
4) Add Prefix Code
and Suffix Code before transmission:[Prefix Code][Processed
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case ..............................................................127
5.2 Character Substi
tution...............................................128
5.3 Prefix/Suffix Code .....................................................134
5.4 Code I
D...................................................................135
5.5 Length Code
............................................................139
5.6 Multi-Barcode Edi
tor..................................................142
5.7 Removal of Speci
al Character .....................................145
5.1 LETTER CASE
By default, the alphabets transmission is case-sensitive, meaning that the alphabets will
be transmitted according to their original case. Ignoring the original letter case, select
[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output
data in lower case only.
Chapter 5
DEFINING OUTPUT FORMAT
*Normal
Upper Case
Lower Case