User's Manual

3G/GPRS Cradle

Reference Manual

AT+BAUD

* only for 3G Cradle

Write Command Response

AT+BAUD=[Parameter]<CR> <CR><LF>OK<CR><LF>

Example

AT+BAUD=1

 Set Baud rate to 115200 successfully

AT+BAUD=0

 Set Baud rate to 57600 successfully

Remarks

Once the Baud rate setting is changed, system will immediately have the setting take effect and

save it. Next time the device will power up with the new setting.

[Parameter] is a character that determines Baud rate setting —

 Parameter =0: Set Baud rate to 57600 bps

 Parameter =1: Set Baud rate to 115200 bps