Product Info
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- USING 4G CRADLE
- HOW MODEM MODE WORKS
- USING 8001 TO CONFIGURE 4G CRADLE
- 15
- 16
- 17
- 3.1 DETECT BAUD RATE
- 18
- 3.2 VIEW THE SETTINGS
- 3.2.1 PREVIEW THE NEW SETTINGS
- 19
- 3.2.2 VIEW THE CURRENT CRADLE SETTINGS
- 3.2.3 VIEW IMEI INFORMATION
- 20
- 3.3 CONFIGURE SETTINGS
- 3.3.1 AUTHENTICATION
- 3.3.2 PIN CODE
- 21
- 3.4 DOWNLOAD SETTINGS
- 3.4.1 DOWNLOAD OK
- 22
- 3.4.2 DOWNLOAD FAIL — INCORRECT PIN
- 3.4.3 DOWNLOAD FAIL — PUK REQUIRED
- 3.4.4 RESET TO DEFAULTS
- 23
- 3.5 TESTING
- UPGRADING FIRMWARE
- SPECIFICATIONS
4G Cradle Reference Manual
3.1 DETECT BAUD RATE
4G Cradle provides users with the function to switch between Baud rates (57600 or
115200 bps). The default value is 115200bps for greater amounts of data transmission.
Select 1. DetectBaudRate on the main menu.
After entering the “DetectBaudRate” item, the mobile computer will detect and display
the current Baud rate. Press the [1] or [2] key to select the corresponding Baud rate, or
press the [ESC] key to back to the previous menu.
After the [1] or [2] key is pressed, the message shows up indicating Baud rate setting is
done. Once the Baud rate setting is changed, system will immediately have the setting
take effect and save it. Next time the device will power up with the new setting.
18