Product Info
Table Of Contents
- IMPORTANT NOTICES
- RELEASE NOTES
- INTRODUCTION
- USING 4G CRADLE
- HOW MODEM MODE WORKS
- USING 8001 TO CONFIGURE 4G CRADLE
- 15
- 16
- 17
- 3.1 DETECT BAUD RATE
- 18
- 3.2 VIEW THE SETTINGS
- 3.2.1 PREVIEW THE NEW SETTINGS
- 19
- 3.2.2 VIEW THE CURRENT CRADLE SETTINGS
- 3.2.3 VIEW IMEI INFORMATION
- 20
- 3.3 CONFIGURE SETTINGS
- 3.3.1 AUTHENTICATION
- 3.3.2 PIN CODE
- 21
- 3.4 DOWNLOAD SETTINGS
- 3.4.1 DOWNLOAD OK
- 22
- 3.4.2 DOWNLOAD FAIL — INCORRECT PIN
- 3.4.3 DOWNLOAD FAIL — PUK REQUIRED
- 3.4.4 RESET TO DEFAULTS
- 23
- 3.5 TESTING
- UPGRADING FIRMWARE
- SPECIFICATIONS
4G Cradle Reference Manual
4.2 CRADLE DOWNLOAD MODE
Regardless of the result of initialization, you can issue “AT+DOWNLOAD” to upgrade to a
new firmware version when available.
1)
Connect a spare IR cradle to your computer and make sure the cradle baud rate is
115,200 bps (best suggestion).
2)
Connect the power supply cords of the spare cradle and the 4G Cradle to a suitable
power outlet separately.
3)
Hold the spare cradle upside-down so that its IR interface is facing to the IR interface
of the 4G Cradle, as shown as the illustration.
4)
Run HyperTerminal on your computer. Type “AT+DOWNLOAD”, and press the [ENTER]
key.
5)
When the 4G Cradle is ready to download a new program, the TX/RX and LAN
indicators will flash.
6)
Exit HyperTerminal.
7)
Run CipherLab download utility, such as ProgLoad.exe, on your computer.
8)
During downloading, the TX/RX and LAN indicators will flash.
9)
The 4G Cradle will restart itself automatically upon completion of program download.
28