User's Manual

53
Configuring 5000/5100:
System Menu
4.3.6 Load Program
Screen 13: System Menu> 6. Load Program
The terminal must be configured correctly for downloading either of the following:
z
Program update
z
New application program
z
Font file (only RS-232 interface is allowed)
RS-232
Default parameters are 115200, none, 8, 1.
The communication parameters at PC end should be
set accordingly.
Interfaces:
Ethernet
See System Menu> Net Menu> Download via TCP/IP
Table 19: Downloading interfaces
Results
z
Success: the new program or font file will be activated right after downloading.
z
Failure: the terminal will resume to the current application program or font