User's Manual

8200 Series Mobile Computer Reference Manual

3.2.6 KEY CLICK

The system will produce an audible signal when any key on the keypad is pressed. The

current value is highlighted. Select a desired tone for the speaker or mute it.

3.2.7 SPEAKER VOLUME

Set the speaker volume.

 Press the arrow keys [Up] and [Down] to adjust the volume level (3 levels) or mute

it.

3.2.8 USB VCOM NO

By default, it is set to use one virtual COM port for all (=FIXED), regardless of how many

8200 Terminals are connected to PC when USB Virtual COM is in use. This setting

requires you to connect one 8200 at a time, and will facilitate configuring a great amount

of 8200 Terminals via the same virtual COM port (for administrators’ or factory use). If

necessary, you can have it set to use variable virtual COM port (=Change by Serial

Number), which will vary by the serial number of each different 8200.

 Press the arrow keys [Up] and [Down] to select between “Fixed” and “Change by

Serial Number”.

3.2.9 USB CHARGE CURRENT

By default, the USB charging current is set to 500 mA. For direct charging via the USB

cable without supplying a power adaptor, the standard charging current is 500 mA. If you

connect the Terminal to a USB hub, the charging current may be insufficient. In that case,

change the charging current to 100 mA after connecting the USB cable. It will take a

longer time to charge to full.

 Press the arrow keys [Up] and [Down] to select between “500 mA” and “100 mA”.

 To disable charging for 8200, select “0 mA”.

Note: (1) USB direct charging, 500 mA: USB icon

(2) USB direct charging, 100 mA: Highlighted USB icon

(3) 5V charging from the adaptor: Plug icon

3.2.10 FONT

Font version information can be viewed here. It displays System Font if there is no

custom font file. If a multi-language font file is downloaded, you will be able to select a

font from the list.