User's Manual

8200 Series Mobile Computer Reference Manual

3.6 LOAD PROGRAM

Here you can access the Load Program service provided by the kernel. Because the

kernel will take over the job, you will not be able to return to System Menu by pressing

[ESC]. After downloading, restart the Terminal to activate the new program. Refer to

Appendix I 錯誤! 找不到參照來源。

Note: The Terminal will stay in download mode for approximately 30 seconds.

.SHX Program Download one of the following C program files and/or font file:

Program File

 AG Runtime:

U8200.shx (Batch AG)

WU8200.shx (WLAN AG)

 CipherNet Runtime:

82xx-5250.shx (CipherNet-5250)

82xx-VT.shx (CipherNet-VT)

 BASIC Runtime

Note

B8200.shx

 User program

Font File Refer to the Font Files folder on CD-ROM.

If you have downloaded a BASIC Runtime program, the next time you enter the Load

Program submenu you will be able to select whether to download a C program (.SHX) or

BASIC program (.SYN).

Note: (1) “Load Basic” menu is only available after you have downloaded a BASIC

Runtime program.

(2) In addition to the system font, there can be only one font file downloaded to

the Terminal.